DOT Air Brake Compression Run Tee for Nylon Tubing, Male, Brass, 1/4" x 1/8-27 x 1/4", Tube x Pipe x Tube
(Pack of
5)
SKU:1511572 Item#: 1511572
• Fittings are shipped with nuts, sleeves and inserts preassembled, ready to slip onto tubing
• Meets D.O.T. FMVSS 571.106
• Temperature range: –40°F to +200°F (–40°C to +93°C)
• Exceeds pressure requirements of automotive air brake systems
• Typical applications include air brake systems, air control and gauge lines
• Used with nylon tubing (SAE J844, Type 3)
Assembly Instructions
1. Cut tubing squarely.
2. Insert tubing into fitting until bottomed on seat.
3. Tighten nut with wrench until one thread remains visible on the fitting body; or, the nut should be screwed down finger-tight, then wrench-tightened as indicated in the table (this will allow for a number of remakes).
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Frequently Bought Together
Parker DOT Field Attachable - Spring Guard 3/8
$0.00
Couldn't load pickup availability
Air Brake Compression Nut Brass 5/32"
$0.00
Couldn't load pickup availability
DOT Compression Spring Guard Steel 3/8"
$0.00
Couldn't load pickup availability
DOT Elbow Male 45° Brass 1/4 x 1/4-18
$0.00
Couldn't load pickup availability
DOT Compression Connector Male Brass 1/2 x 1/4"
$0.00
Couldn't load pickup availability
DOT Swivel Run Tee Male Brass 1/4 x 1/8-27 x 1/4"
$0.00
Couldn't load pickup availability
Hose Clamp with Hardened Carbon Steel Hex Head Screw Starter Kit
$0.00
Couldn't load pickup availability
Fuel Line Hose 3/8" ID x 25'
$0.00
Couldn't load pickup availability
Vacuum Hose Connector Straight 3/16 x 3/16"
$0.00
Couldn't load pickup availability
DOT Swivel Elbow Male 360° Brass 3/8 x 1/4-18
$0.00
Couldn't load pickup availability
Standard Industrial Safety Push-Button Safety Coupler 1/4" Body x 1/4" FNPT
$0.00
Couldn't load pickup availability
All-Plastic Ergonomic Venturi Blow Gun
$0.00
Couldn't load pickup availability
Front Bumper Push-Type Retainer Nylon 10mm
$0.00
Couldn't load pickup availability
Phillips Truss Head Sheet Metal Screw Steel 15mm
$0.00
Couldn't load pickup availability
Front Rear Bumper Specialty Rivet 3.2mm
$0.00
Couldn't load pickup availability
Counterbore Screw 7/16-14 x 2-1/2"
$0.00
Couldn't load pickup availability
Twist Knot Wire Wheel 3" Dia., .014" SS Wire Dia., 1/4" Shank
$0.00
Couldn't load pickup availability
Upper Grille Retainer Nylon 1-1/4"
$0.00
Couldn't load pickup availability
Counterbore Screw 7/16-14 x 2-1/2"
$0.00
Couldn't load pickup availability
Twist Knot Wire Wheel 3" Dia., .014" SS Wire Dia., 1/4" Shank
$0.00
Couldn't load pickup availability
Upper Grille Retainer Nylon 1-1/4"
$0.00
Couldn't load pickup availability
Product Description
• Fittings are shipped with nuts, sleeves and inserts preassembled, ready to slip onto tubing• Meets D.O.T. FMVSS 571.106
• Temperature range: –40°F to +200°F (–40°C to +93°C)
• Exceeds pressure requirements of automotive air brake systems
• Typical applications include air brake systems, air control and gauge lines
• Used with nylon tubing (SAE J844, Type 3)
Assembly Instructions
1. Cut tubing squarely.
2. Insert tubing into fitting until bottomed on seat.
3. Tighten nut with wrench until one thread remains visible on the fitting body; or, the nut should be screwed down finger-tight, then wrench-tightened as indicated in the table (this will allow for a number of remakes).
Technical Specifications
| Item#: | 1511572 |
|---|---|
| Manufacturer Model #: | 84293 |
| Fitting Type | Compression - Nylon Tubing |
| Style | DOT |
| Material | Brass |
| Configuration | Male Run Tee |
| Connection Type A x B x C | Tube x Pipe x Tube |
| Fitting Dimension A | 1/4 " |
| Fitting Dimension B | 1/8-27 |
| Fitting Dimension C | 1/4 " |
| Size | 1/4X1/8 |
| Type | Compression |
| UNSPSC #: | 25171700 |
| TAA Compliant: | No |
| Weight: | 0.45 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
