DOT Air Brake Compression Elbow for Nylon Tubing, 90°, Male, Brass, 3/8 x 3/8" Tube x Pipe
(Pack of
5)
SKU:84285 Item#: 84285
Fittings are shipped with nuts, sleeves and inserts preassembled, ready to slip onto tubing
Meets D.O.T. FMVSS 571.106
Temperature range: 40°F to +200°F (40°C to +93°C)
Exceeds pressure requirements of automotive air brake systems
Typical applications include air brake systems, air control and gauge lines
Used with nylon tubing (SAE J844, Type 3)
Assembly Instructions
1. Cut tubing squarely.
2. Insert tubing into fitting until bottomed on seat.
3. Tighten nut with wrench until one thread remains visible on the fitting body; or, the nut should be screwed down finger-tight, then wrench-tightened as indicated in the table (this will allow for a number of remakes).
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Frequently Bought Together
Parker DOT Compression - Nylon Bulkhead Union 5/8x5/8
Couldn't load pickup availability
DOT Compression Insert Male Brass 1/2 x 3/8"
Couldn't load pickup availability
Parker DOT Compression - Nylon Male Elbow 90 Degrees 1/2x1/2
Couldn't load pickup availability
Ball Check Grease Fitting Straight
Couldn't load pickup availability
Air Brake Tube Insert Brass 3/8"
Couldn't load pickup availability
Parker DOT PTC Male Elbow 90 Degrees 3/4x1/2
Couldn't load pickup availability
Miniature Clamp SS 5/16 to 7/8"
Couldn't load pickup availability
Hose Clamp 301 SS 9/16 to 1-1/4"
Couldn't load pickup availability
DOT Elbow Male Nylon 1/2 x 1/2-14
Couldn't load pickup availability
Miniature Clamp SS 7/32 to 5/8"
Couldn't load pickup availability
Slotted Hex Head Hose Clamp 301 SS 11/16 to 1-1/2"
Couldn't load pickup availability
Hose Clamp 301 SS 1/2 to 29-32"
Couldn't load pickup availability
Front Bumper and Radiator Support Drive Rivet
Couldn't load pickup availability
Front Bumper Drive Rivet Plastic 7mm Hole
Couldn't load pickup availability
Hex Head Sheet Metal Screw with 16mm Washer Steel
Couldn't load pickup availability
Product Description
Fittings are shipped with nuts, sleeves and inserts preassembled, ready to slip onto tubing Meets D.O.T. FMVSS 571.106
Temperature range: 40°F to +200°F (40°C to +93°C)
Exceeds pressure requirements of automotive air brake systems
Typical applications include air brake systems, air control and gauge lines
Used with nylon tubing (SAE J844, Type 3)
Assembly Instructions
1. Cut tubing squarely.
2. Insert tubing into fitting until bottomed on seat.
3. Tighten nut with wrench until one thread remains visible on the fitting body; or, the nut should be screwed down finger-tight, then wrench-tightened as indicated in the table (this will allow for a number of remakes).
Technical Specifications
| Item#: | 84285 |
|---|---|
| Fitting Type | Compression - Nylon |
| Style | DOT |
| Material | Brass |
| Configuration | Male Elbow 90 Degrees |
| Connection Type A x B | Tube x Pipe |
| Fitting Dimension A | 3/8 " |
| Fitting Dimension B | 3/8-18 " |
| Type | Compression |
| UNSPSC #: | 25171700 |
| TAA Compliant: | No |
| Weight: | 0.68 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
