Home Fasteners Bolts Cap Screws Hex Cap Screw Grade 9 Alloy Steel 7/16-20 x 1-1/2"
Bolts
DV_ZoomOriginal_P_32504_WB.jpg
DV_ZoomOriginal_P_32504_AP4.jpg
DV_ZoomOriginal_P_32504_AP2.jpg
DV_ZoomOriginal_P_32504_AP1.jpg
DV_ZoomOriginal_P_32504_AP3.jpg
DV_ZoomOriginal_P_32504_AS1.jpg
DV_ZoomOriginal_P_32504_CP3.jpg
DV_ZoomOriginal_P_32504_CP2.jpg
DV_ZoomOriginal_P_32504_CP1.jpg
DV_ZoomOriginal_P_32504_WB.jpg
DV_ZoomOriginal_P_32504_AP4.jpg
DV_ZoomOriginal_P_32504_AP2.jpg
DV_ZoomOriginal_P_32504_AP1.jpg
DV_ZoomOriginal_P_32504_AP3.jpg
DV_ZoomOriginal_P_32504_AS1.jpg
DV_ZoomOriginal_P_32504_CP3.jpg
DV_ZoomOriginal_P_32504_CP2.jpg
DV_ZoomOriginal_P_32504_CP1.jpg
Maintenance Engineered Fastening Systems

Hex Cap Screw, Grade 9, Alloy Steel, Zinc Finish, Fine Thread, 21/64" Head Height, 5/8" Across Flats, 7/16-20 x 1-1/2"
(Pack of 50)

Item#: A848

Tru-Torq®

• Ultra-high-strength matched component fastening system
• 20% stronger than Grade 8
• Fatigue/vibration-resistant UNJ thread design
• 20% higher-than-normal wrenching surface for increased safety and even distribution of torque forces
• Heat-treated, quenched and tempered
• Perma Plated for superior corrosion protection
• Proprietary head marking for improved traceability
• Diameter marked on head for easy identification
• Trailing thread does not enter the extrusion angle
• Increased length of chamfer allows easier alignment and assembly
• Matched strength nuts, flat washers and lock nuts available
• Minimum 180,000 PSI tensile strength
• Exceeds SAE, ASTM and Military Grade 8 strength requirements
• Designed for the most demanding maintenance requirements
• For use in critical applications
Minimum Threaded Length – Up to 6" Long: (2 x Diameter) + 1/4"; Over 6" Long: (2 x Diameter) + 1/2

Read More
Check Availability

California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov

Catalog page#: 11-6

Frequently Bought Together

DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M8-1.25 x 40mm

Item#: 55605
DV_ZoomOriginal_P_517.jpg

Hex Cap Screw Property Class 8.8 M10-1.5 x 40mm

Item#: 61272
DV_ZoomOriginal_P_532_WB.jpg

DIN 6921 Hex Flange Bolt Grade 8.8 M8-1.25 x 16mm

Item#: 59411
DV_ZoomOriginal_P_6610.jpg

Hex Cap Screw Grade 10.9 Alloy Steel M10-1.5 x 40mm

Item#: 10227
DV_ZoomOriginal_P_517.jpg

Hex Cap Screw Property Class 8.8 M8-1.25 x 25mm

Item#: 27343
DV_ZoomOriginal_P_6610.jpg

Hex Cap Screw Grade 10.9 Alloy Steel M8-1.25 x 30mm

Item#: 10215
DV_ZoomOriginal_I_80264.jpg

DIN 125A Flat Washer Grade 140 HV M10

Item#: 80264
DV_ZoomOriginal_I_82353_WB.jpg

Open End Rivet Large Flange Head Aluminum 3/16"

Item#: 82353
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M8-1.25 x 25mm

Item#: 28687
DV_ZoomOriginal_I_1585301.jpg

Mini-Hole Saw Kit

Item#: 1585301
DV_ZoomOriginal_P_HT5136.jpg

7" Auto-Adjust Pliers

Item#: DY89310301
DV_ZoomOriginal_I_DY89320014.jpg

2Pc Index-Tend Pry Bar Set

Item#: DY89320014
DV_ZoomOriginal_P_2016.jpg

Hex Flange Nut Grade 10 Steel M10-1.5

Item#: 59769
DV_ZoomOriginal_P_11056.jpg

Serrated Hex Flange Nut Alloy Steel M8-1.25

Item#: 28700
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M6-1 x 25mm

Item#: 28681
DV_ZoomOriginal_I_KT13763.jpg

Specialty Rivet with Plastic Cap Aluminum 3.2mm

Item#: KT13763
DV_ZoomOriginal_I_KT11528.jpg

Inner Fender Shield Attaching Clip Nylon Black

Item#: P27685
DV_ZoomOriginal_I_P24252.jpg

Front Fender Liner Push-Type Retainer Nylon 20mm

Item#: P24252

Product Description

• Ultra-high-strength matched component fastening system
• 20% stronger than Grade 8
• Fatigue/vibration-resistant UNJ thread design
• 20% higher-than-normal wrenching surface for increased safety and even distribution of torque forces
• Heat-treated, quenched and tempered
• Perma Plated for superior corrosion protection
• Proprietary head marking for improved traceability
• Diameter marked on head for easy identification
• Trailing thread does not enter the extrusion angle
• Increased length of chamfer allows easier alignment and assembly
• Matched strength nuts, flat washers and lock nuts available
• Minimum 180,000 PSI tensile strength
• Exceeds SAE, ASTM and Military Grade 8 strength requirements
• Designed for the most demanding maintenance requirements
• For use in critical applications
Minimum Threaded Length – Up to 6" Long: (2 x Diameter) + 1/4"; Over 6" Long: (2 x Diameter) + 1/2

Technical Specifications

Item#: A848
Style Premium
Diameter 7/16 "
Thread Pitch 20
Thread Fine
Length 1-1/2 "
Type Hex Cap Screw
Across Flats 5/8 "
Material Alloy Steel
Grade 9
Finish Bright Zinc
Tensile Strength 180,000 PSI
Head Style High Hex
Head Height 21/64 "
Thread Form UNJ
Thread Length Partial
Thread Length Minimum 1-1/8 "
UNSPSC #: 31161501
TAA Compliant: Yes
Weight: 4.22 lb

Product Restrictions

California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov

Suggested Products

DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M8-1.25 x 20mm

Item#: 55603
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M8-1.25 x 30mm

Item#: 55604
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M8-1.25 x 16mm

Item#: 55602
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M10-1.25 x 30mm

Item#: 55608
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M6-1 x 16mm

Item#: 28679
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M8-1.25 x 25mm

Item#: 28687
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M6-1 x 12mm

Item#: 28678
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M6-1 x 25mm

Item#: 28681
DV_ZoomOriginal_P_532_WB.jpg

DIN 6921 Hex Flange Bolt Grade 8.8 M6-1 x 16mm

Item#: 59407
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M6-1 x 20mm

Item#: 28680
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M10-1.25 x 20mm

Item#: 55607
DV_ZoomOriginal_P_2035_WB.jpg

Hex Flange Bolt Grade 10.9 M10-1.25 x 40mm

Item#: 55609

Your Recently Viewed Items