High Solids Paints, Flat White, 16oz Aerosol
(Pack of
1)
SKU:1509160 Item#: 1509160
Provides the best coverage and finish performance in the aerosol paint industry.
Lawson’s High Solids save money with the lowest cost-per-square-foot coverage.
Best Performance
In a side-by-side comparison, Lawson’s formulations exceed solids content found in top-of-the-line popular brands. This gives High Solids the best coverage and finish performance in the aerosol paint industry!
Fewer Cans Needed to Do a Job!
Lawson’s High Solids also give you increased coverage per can, reducing the number of cans needed to do a job. Typical low solids paint brands often require up to four 16 oz. cans to provide coverage that one 20 oz. can of Lawson High Solids paint affords you!
• Wide color selection
• Labor-saving: Often just one coat will do!
• Tough: Passes 150-hour salt-spray test; beats top brands in gloss retention and fade resistance
Industrial Applications – 20 oz. can size; 16 oz. net wt. (1509196 – 20 oz. can size; 15.5 oz. net wt.) Available in package quantities of 1, 3 and 12
• Heat-resistant up to 250°F (121°C); engine paints up to 350°F (177°C); high-temperature up to 1,200°F (649°C)
For use on shop equipment, racks, shelving, assembly lines, motors, safety marking, and more.
NOTE: Actual colors may vary in shade from colors shown here, since they are ink reproductions.
Play it Safe! Wear safety glasses whenever spray painting.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
This item cannot ship via any air services. Please reference the SDS for hazardous information specific to this item. Additional shipping charges may apply.
Catalog page#: 1-36
Frequently Bought Together
Stripe Ground Marking Paint, Precaution Blue
$0.00
Couldn't load pickup availability
Industrial-Grade High Solids Spray Paint, Gloss Red
$0.00
Couldn't load pickup availability
Hi-Tech Enamel Spray Paint, Gloss White
$0.00
Couldn't load pickup availability
High-Tech Seam Sealer Clear 11fl.oz
$0.00
Couldn't load pickup availability
Windshield Wash Tablets
$0.00
Couldn't load pickup availability
Euro-Blackâ„¢ Satin Finish 15oz
$0.00
Couldn't load pickup availability
Underbody Cavity Wax Coating
$0.00
Couldn't load pickup availability
Rustore Rust Converter
$0.00
Couldn't load pickup availability
DTM Primer Tan
$0.00
Couldn't load pickup availability
Molding Clip with Sealer Nylon White 10 x 12mm
$0.00
Couldn't load pickup availability
Rocker Door and Exterior Molding Retainer
$0.00
Couldn't load pickup availability
Front Bumper Push-Type Retainer Nylon 10mm
$0.00
Couldn't load pickup availability
SafetyPro 8 Mil Nitrile Glove Orange Medium
$0.00
Couldn't load pickup availability
SafetyPro 8 Mil Nitrile Glove Orange X-Large
$0.00
Couldn't load pickup availability
2K Epoxy Primer Filler Dark Grey
$0.00
Couldn't load pickup availability
Oil-Only Sorbent Pad
$0.00
Couldn't load pickup availability
Miniature Incandescent Bulb 12V 32CP
$0.00
Couldn't load pickup availability
Miniature Incandescent Bulb 12V
$0.00
Couldn't load pickup availability
Product Description
Provides the best coverage and finish performance in the aerosol paint industry.Lawson’s High Solids save money with the lowest cost-per-square-foot coverage.
Best Performance
In a side-by-side comparison, Lawson’s formulations exceed solids content found in top-of-the-line popular brands. This gives High Solids the best coverage and finish performance in the aerosol paint industry!
Fewer Cans Needed to Do a Job!
Lawson’s High Solids also give you increased coverage per can, reducing the number of cans needed to do a job. Typical low solids paint brands often require up to four 16 oz. cans to provide coverage that one 20 oz. can of Lawson High Solids paint affords you!
• Wide color selection
• Labor-saving: Often just one coat will do!
• Tough: Passes 150-hour salt-spray test; beats top brands in gloss retention and fade resistance
Industrial Applications – 20 oz. can size; 16 oz. net wt. (1509196 – 20 oz. can size; 15.5 oz. net wt.) Available in package quantities of 1, 3 and 12
• Heat-resistant up to 250°F (121°C); engine paints up to 350°F (177°C); high-temperature up to 1,200°F (649°C)
For use on shop equipment, racks, shelving, assembly lines, motors, safety marking, and more.
NOTE: Actual colors may vary in shade from colors shown here, since they are ink reproductions.
Play it Safe! Wear safety glasses whenever spray painting.
Technical Specifications
| Item#: | 1509160 |
|---|---|
| Type | High Solids Paint |
| Container Type | Aerosol |
| Size | 16 Oz. |
| Basic Color | White |
| Color | Flat White |
| Application Temperature | 50 to 90 °F |
| Dry Time (To Touch) | 10 min |
| Dry Time (Tack Free) | 30 min |
| Base Type | Oil |
| Physical Form | Aerosol |
| Cure / Recoat Time | For best results recoat within 1 hour or after 48 hours. |
| UNSPSC #: | 31211500 |
| TAA Compliant: | Yes |
| Weight: | 1.5 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
This item cannot ship via any air services. Please reference the SDS for hazardous information specific to this item. Additional shipping charges may apply.
