Large Diameter Tapcon® Anchor, Carbon Steel, Zinc Finish, 3/8 x 2-1/2"
(Pack of
10)
• High performance, high production, self-threading anchor
• Carbon steel with zinc plating
• Removable
• Low slippage
• High shear strength
• Finished head
• Vibration-resistant
• Ideal for stadium seating, racking, shelving and conveyors
1. Using the correct diameter carbide tipped bit, drill a pilot hole at least 1/4" deeper than anchor embedment.
2. Using a 1/2" impact wrench, drive anchor until fully seated.
Length Identification Code is located on the anchor head for easy identification and inspection
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together
Masonry Anchor Assortment 700Pcs
Couldn't load pickup availability
Toggle Bolt Anchor Assortment 70Pcs
Couldn't load pickup availability
Drill 'N Drive Masonry Anchor Assortment 283Pcs
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M8-1.25 x 30mm
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M6-1 x 16mm
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M8-1.25 x 20mm
Couldn't load pickup availability
Masonry Anchor Phillips Head #14-10 x 2-1/4"
Couldn't load pickup availability
Masonry Anchor Hex Washer Head Steel 1/4 x 1"
Couldn't load pickup availability
Masonry Anchor Star Head Steel 1/4 x 1-3/4"
Couldn't load pickup availability
Woven Polyester Electrical Tape 19mm x 25m
Couldn't load pickup availability
Acrysol Auto Body Degreaser 16oz
Couldn't load pickup availability
Bumper Fascia General Purpose Split Rivet 3/16"
Couldn't load pickup availability
Product Description
• High performance, high production, self-threading anchor• Carbon steel with zinc plating
• Removable
• Low slippage
• High shear strength
• Finished head
• Vibration-resistant
• Ideal for stadium seating, racking, shelving and conveyors
1. Using the correct diameter carbide tipped bit, drill a pilot hole at least 1/4" deeper than anchor embedment.
2. Using a 1/2" impact wrench, drive anchor until fully seated.
Length Identification Code is located on the anchor head for easy identification and inspection
Technical Specifications
| Item#: | 61666 |
|---|---|
| Diameter | 3/8 " |
| Length | 2-1/2 " |
| Type | Screw Anchor |
| Drill Size | 5/16 " |
| UNSPSC #: | 31162104 |
| TAA Compliant: | Yes |
| Weight: | 0.83 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
