Lock Washer Self-Locking Steel 1"
(Pack of
10)
• Resists loosening caused by vibration
• Ease of assembly and disassembly
• Locking function not affected by lubrication
• Positive locking – low or high preload levels
• Minimum surface marring or scratching
• Zinc flake coated with Delta Protekt® for superior corrosion resistance – up to 6 times longer than standard zinc plating
• Thru-hardened: Minimum 44 HRC, Maximum 51 HRC
Available in either a Standard O.D. or a Large O.D. series. The Standard O.D. series is designed for counter-bore holes according to DIN 974. The Large O.D. series washers are designed for use on large/slotted holes, painted/sensitive surfaces or soft materials. They can also for use with flanged bolts or nuts for optimum load distribution.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Catalog page#: 11-30
Frequently Bought Together
Hammerlock Cotter Pin Kit 140Pcs
Couldn't load pickup availability
Hammerlock Cotter Pin Kit 75Pcs
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M10-1.25 x 16mm
Couldn't load pickup availability
Lock Washer Self-Locking 316L Stainless Steel 1/4"
Couldn't load pickup availability
Lock Washer Self-Locking 316L SS #10 (M5)
Couldn't load pickup availability
DIN 127B Standard Lock Washer M18
Couldn't load pickup availability
Nylon Cable Tie 11-3/4" Black
Couldn't load pickup availability
Nylon Cable Tie 7-1/2" Black
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 2-13/16(M8)
Couldn't load pickup availability
DIN 125A Flat Washer Grade 140 HV M12
Couldn't load pickup availability
USS Flat Washer Thru-Hardened Steel 3/8"
Couldn't load pickup availability
Flat Washer 18-8 Stainless Steel #10
Couldn't load pickup availability
Product Description
• Resists loosening caused by vibration• Ease of assembly and disassembly
• Locking function not affected by lubrication
• Positive locking – low or high preload levels
• Minimum surface marring or scratching
• Zinc flake coated with Delta Protekt® for superior corrosion resistance – up to 6 times longer than standard zinc plating
• Thru-hardened: Minimum 44 HRC, Maximum 51 HRC
Available in either a Standard O.D. or a Large O.D. series. The Standard O.D. series is designed for counter-bore holes according to DIN 974. The Large O.D. series washers are designed for use on large/slotted holes, painted/sensitive surfaces or soft materials. They can also for use with flanged bolts or nuts for optimum load distribution.
Technical Specifications
| Item#: | 58101 |
|---|---|
| Nominal Size | 1 " |
| Type | Self-Locking Lock Washer |
| Material | Carbon Steel |
| I.D. | 1.10 " |
| O.D. | 1.54 " |
| Finish | Delta Protekt® |
| Thickness | 0.13 " |
| UNSPSC #: | 31161801 |
| TAA Compliant: | Yes |
| Weight: | 0.33 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
