Lock Washer Self-Locking Steel 7/8"
(Pack of
10.0)
• Resists loosening caused by vibration
• Ease of assembly and disassembly
• Locking function not affected by lubrication
• Positive locking – low or high preload levels
• Minimum surface marring or scratching
• Zinc flake coated with Delta Protekt® for superior corrosion resistance – up to 6 times longer than standard zinc plating
• Thru-hardened: Minimum 44 HRC, Maximum 51 HRC
Available in either a Standard O.D. or a Large O.D. series. The Standard O.D. series is designed for counter-bore holes according to DIN 974. The Large O.D. series washers are designed for use on large/slotted holes, painted/sensitive surfaces or soft materials. They can also for use with flanged bolts or nuts for optimum load distribution.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Catalog Page#: 11-30
Frequently Bought Together
Hex Flange Bolt Grade 10.9 M10-1.25 x 60mm
Couldn't load pickup availability
Serrated Hex Flange Nut Alloy Steel M6-1
Couldn't load pickup availability
Open End Rivet Dome Head Aluminum 5/32"
Couldn't load pickup availability
Lock Washer Self-Locking Steel 1"
Couldn't load pickup availability
DIN 127B Lock Washer A2 Stainless Steel M2.5
Couldn't load pickup availability
DIN 7980 Lock Washer High Collar Steel M12
Couldn't load pickup availability
Bumper Clip Push-Type Retainer Nylon 18mm
Couldn't load pickup availability
Front Bumper Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Fender Bumper Shield Retainer 11/16"
Couldn't load pickup availability
Structural Flat Washer 3"
Couldn't load pickup availability
Structural Flat Washer 1-15/32"
Couldn't load pickup availability
Structural Flat Washer 1-5/16"
Couldn't load pickup availability
Product Description
• Resists loosening caused by vibration• Ease of assembly and disassembly
• Locking function not affected by lubrication
• Positive locking – low or high preload levels
• Minimum surface marring or scratching
• Zinc flake coated with Delta Protekt® for superior corrosion resistance – up to 6 times longer than standard zinc plating
• Thru-hardened: Minimum 44 HRC, Maximum 51 HRC
Available in either a Standard O.D. or a Large O.D. series. The Standard O.D. series is designed for counter-bore holes according to DIN 974. The Large O.D. series washers are designed for use on large/slotted holes, painted/sensitive surfaces or soft materials. They can also for use with flanged bolts or nuts for optimum load distribution.
Technical Specifications
| Item#: | 58100 |
|---|---|
| Nominal Size | 7/8" (M22) |
| Type | Self-Locking Lock Washer |
| Material | Carbon Steel |
| I.D. | 0.92 " |
| O.D. | 1.36 " |
| Finish | Delta Protekt® |
| Thickness | 0.13 " |
| UNSPSC #: | 31161801 |
| TAA Compliant: | Yes |
| Weight: | 0.29 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
