Lock Washer Self-Locking Steel M10
(Pack of
20.0)
• Resists loosening caused by vibration
• Ease of assembly and disassembly
• Locking function not affected by lubrication
• Positive locking – low or high preload levels
• Minimum surface marring or scratching
• Zinc flake coated with Delta Protekt® for superior corrosion resistance – up to 6 times longer than standard zinc plating
• Thru-hardened: Minimum 44 HRC, Maximum 51 HRC
Available in either a Standard O.D. or a Large O.D. series. The Standard O.D. series is designed for counter-bore holes according to DIN 974. The Large O.D. series washers are designed for use on large/slotted holes, painted/sensitive surfaces or soft materials. They can also for use with flanged bolts or nuts for optimum load distribution.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Catalog page#: 11-30
Frequently Bought Together
DIN 125A Flat Washer Grade 140 HV M6
Couldn't load pickup availability
DIN 125A Flat Washer Grade 140 HV M10
Couldn't load pickup availability
DIN 6921 Hex Flange Bolt Grade 8.8 M8-1.25 x 16mm
Couldn't load pickup availability
Lock Washer Alloy Steel 3/4"
Couldn't load pickup availability
Lock Washer Self-Locking 316L Stainless Steel 1/4"
Couldn't load pickup availability
Lock Washer Self-Locking 316L SS #10 (M5)
Couldn't load pickup availability
Rocker Molding Clip with Sealer Nylon Blue 17mm
Couldn't load pickup availability
Rocker Panel Molding Clip Nylon White 12 x 20mm
Couldn't load pickup availability
Inner Fender Shield Attaching Clip Nylon Black
Couldn't load pickup availability
DIN 125A Flat Washer Steel M10
Couldn't load pickup availability
Flat Washer Grade 12 Thru-Hardened Steel M8
Couldn't load pickup availability
SAE Flat Washer Low Carbon Steel 5/16"
Couldn't load pickup availability
Product Description
• Resists loosening caused by vibration• Ease of assembly and disassembly
• Locking function not affected by lubrication
• Positive locking – low or high preload levels
• Minimum surface marring or scratching
• Zinc flake coated with Delta Protekt® for superior corrosion resistance – up to 6 times longer than standard zinc plating
• Thru-hardened: Minimum 44 HRC, Maximum 51 HRC
Available in either a Standard O.D. or a Large O.D. series. The Standard O.D. series is designed for counter-bore holes according to DIN 974. The Large O.D. series washers are designed for use on large/slotted holes, painted/sensitive surfaces or soft materials. They can also for use with flanged bolts or nuts for optimum load distribution.
Technical Specifications
| Item#: | 1462179 |
|---|---|
| Nominal Size | M10 |
| Type | Self-Locking Lock Washer |
| Material | Carbon Steel |
| I.D. | 0.42 " |
| O.D. | 0.65 " |
| Finish | Delta Protekt® |
| Thickness | 0.10 " |
| UNSPSC #: | 31161801 |
| TAA Compliant: | Yes |
| Weight: | 0.1 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
