Miniature LED Bulb, 25Watt, Resistor Warning Canceller
(Pack of
2)
SKU:1607731 Item#: 1607731
Vehicles are required to have Outage Detection systems that warn drivers when a bulb has burned out. These systems work by monitoring the power consumed by the bulb. When the power drops below a preset threshold, the warning is triggered. The warning can be either a hyperflash (fast-blinking of the turn signal) and/or a warning light on the dashboard.
LED bulbs consume a fraction of the power of incandescent bulbs. This difference can be enough to trigger your car’s outage warning system. In many cases, LED bulbs use so little power they end up triggering an outage warning.
The warning canceller must be connected between the turn and ground wires of the socket. Because its power consumption will be dissipated as heat, it is important to attach it to a flat metal surface so the heat can be safely dissipated.
The required warning canceller is determined by the wattage of the incandescent bulb being replaced. For bulbs inbetween choose whichever is closest.
Frequently Bought Together
Miniature Incandescent Bulb 12V 37CP
$0.00
Couldn't load pickup availability
Miniature Incandescent Bulb 12V
$0.00
Couldn't load pickup availability
Miniature Incandescent Bulb 12V
$0.00
Couldn't load pickup availability
Miniature Incandescent Bulb 12V
$0.00
Couldn't load pickup availability
Miniature Incandescent Bulb 12V
$0.00
Couldn't load pickup availability
Miniature Incandescent Bulb 12V 36CP
$0.00
Couldn't load pickup availability
Miniature Incandescent Bulb 12V 37CP
$0.00
Couldn't load pickup availability
Miniature Incandescent Bulb 12V
$0.00
Couldn't load pickup availability
180-degree Wide Beam Head Light with Side Light
$0.00
Couldn't load pickup availability
7" Auto-Adjust Pliers
$0.00
Couldn't load pickup availability
2Pc Index-Tend Pry Bar Set
$0.00
Couldn't load pickup availability
18" Locking Smooth Operator Clamp
$0.00
Couldn't load pickup availability
Inner Fender Shield Attaching Clip Nylon Black
$0.00
Couldn't load pickup availability
Front Fender Liner Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Bumper Drive Rivet Plastic 10mm Hole
$0.00
Couldn't load pickup availability
Product Description
Vehicles are required to have Outage Detection systems that warn drivers when a bulb has burned out. These systems work by monitoring the power consumed by the bulb. When the power drops below a preset threshold, the warning is triggered. The warning can be either a hyperflash (fast-blinking of the turn signal) and/or a warning light on the dashboard.LED bulbs consume a fraction of the power of incandescent bulbs. This difference can be enough to trigger your car’s outage warning system. In many cases, LED bulbs use so little power they end up triggering an outage warning.
The warning canceller must be connected between the turn and ground wires of the socket. Because its power consumption will be dissipated as heat, it is important to attach it to a flat metal surface so the heat can be safely dissipated.
The required warning canceller is determined by the wattage of the incandescent bulb being replaced. For bulbs inbetween choose whichever is closest.
Technical Specifications
| Item#: | 1607731 |
|---|---|
| Type | Miniature |
| Light Source | LED |
| Watts | 25 |
| Description | 25w Warning Canceller |
| UNSPSC #: | 25172901 |
| TAA Compliant: | Yes |
| Weight: | 0.04 lb |
