Home Automotive Hardware Push-on Retainer 3.2 mm Stud 9.5 mm O.D.
Automotive Hardware
DV_ZoomOriginal_I_1679282.jpg
DV_ZoomOriginal_I_1679282.jpg

Pushon Retainer For 3.2Mm Stud With 9.5Mm Od, Zinc-Plated Steel
(Pack of 100)

Kent Automotive

Pushon Retainer For 3.2Mm Stud With 9.5Mm Od, Zinc-Plated Steel

Read More

California Proposition 65: Not Applicable
www.P65Warnings.ca.gov

Frequently Bought Together

DV_ZoomOriginal_I_1446663.jpg

Rocker Door and Exterior Molding Retainer

Item#: 1446663
DV_ZoomOriginal_I_1457513.jpg

Fender Liner Screw Grommet Nylon M5.5

Item#: 1457513
DV_ZoomOriginal_I_1457513.jpg

Fender Liner Screw Grommet Nylon M5.5

Item#: 1457513
DV_ZoomOriginal_I_KT13688.jpg

Wheel Flare Molding Clip with Sealer Nylon

Item#: KT13688
DV_ZoomOriginal_I_P85465.jpg

Fender Liner Blind Rivet Plastic 6.3-6.8mm Hole

Item#: P85465
DV_ZoomOriginal_I_P38008.jpg

Trunk Liner Retainer Plastic 15mm

Item#: P38008
DV_ZoomOriginal_I_1446663.jpg

Rocker Door and Exterior Molding Retainer

Item#: 1446663
DV_ZoomOriginal_I_1457513.jpg

Fender Liner Screw Grommet Nylon M5.5

Item#: 1457513
DV_ZoomOriginal_I_P13770.jpg

Phillips Truss Head Sheet Metal Screw Steel 15mm

Item#: P13770
DV_ZoomOriginal_I_P43782.jpg

Spot Weld Remover Drill Bit HSS 2-13/16(M8)

Item#: P43782

Product Description

Pushon Retainer For 3.2Mm Stud With 9.5Mm Od, Zinc-Plated Steel

Technical Specifications

Item#: 1679282
Make Chrysler/GM/Honda
OEM Number 6510521AA/11502794/90301-ST0-003
Type Push-On Retainer
Material Steel
Finish Zinc
Stud Size 3.2 mm
UNSPSC #: 31163211
TAA Compliant: Yes

Product Restrictions

California Proposition 65: Not Applicable
www.P65Warnings.ca.gov

Suggested Products

DV_ZoomOriginal_I_P23263.jpg

Rear Bumper Cover Retainer Plastic 18mm

Item#: P23263
DV_ZoomOriginal_I_1404768.jpg

Bumper and Wheel Well Liner Push-Type Retainer

Item#: 1404768
DV_ZoomOriginal_I_KT13998.jpg

Engine Under Cover Drive Rivet Plastic 7mm Hole

Item#: KT13998
DV_ZoomOriginal_I_1089482.jpg

Woven Polyester Electrical Tape 19mm x 25m

Item#: 1089482
DV_ZoomOriginal_I_KT13747.jpg

Bumper Fascia General Purpose Split Rivet 3/16"

Item#: KT13747
DV_ZoomOriginal_I_1365427.jpg

Fender Apron Drive Rivet 8mm Hole

Item#: 1365427
DV_ZoomOriginal_I_KT11397.jpg

Front Fender Push-Type Retainer Nylon 20mm

Item#: KT11397
DV_ZoomOriginal_I_P62445.jpg

Fender Bumper Shield Retainer 11/16"

Item#: P62445
DV_ZoomOriginal_I_1500739.jpg

Drive Rivet Nylon M8

Item#: 1500739
DV_ZoomOriginal_I_KT13763.jpg

Specialty Rivet with Plastic Cap Aluminum 3.2mm

Item#: KT13763
DV_ZoomOriginal_I_KT11528.jpg

Inner Fender Shield Attaching Clip Nylon Black

Item#: P27685
DV_ZoomOriginal_I_P85262.jpg

Bumper Radiator and Grille Drive Rivet 7mm Hole

Item#: P85262

Your Recently Viewed Items