Roughneck™ Wire Mesh Sling, 8' Length
(Pack of
1)
Made with high tensile steel mesh and alloy steel end fittings, these slings are widely used in metalworking shops and steel warehouses where loads are abrasive, hot or tend to cut web slings.
• Great for use in metalworking shops
• Steel construction resists abrasion and cutting
• Good flexibility and low stretch reduce load damage
• Mesh width helps control and balance loads
• Each sling proof tested and certified
The choker fitting must not be positioned against a load edge or directly on the triangle fitting.
Non-Stock items are made-to-order and are non-returnable.
Do not exceed rated capacities. Sling capacity decreases as the angle from horizontal decreases. Slings should not be used at angles of less than 30°.
Frequently Bought Together
Shelf Bin, Yellow, 17-7/8" x 6-5/8" x 4"
Couldn't load pickup availability
ShelfMax™ Bin, Blue, 11-5/8" x 6-5/8" x 6"
Couldn't load pickup availability
ShelfMax™ Bin, Yellow, 17-5/8" x 4-1/8" x 6"
Couldn't load pickup availability
Metric Indented Hex Head Bolt with 17mm Washer
Couldn't load pickup availability
Front Bumper Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Hex Head Sheet Metal Screw with 16mm Washer Steel
Couldn't load pickup availability
9/32" x 10' Type SSS Gr. 80 Chain Sling
Couldn't load pickup availability
3/8" x 10' Type SOS Gr. 80 Chain Sling
Couldn't load pickup availability
Tuff-Edge® Web Sling, Polyester, Silver, 8' Length
Couldn't load pickup availability
Roughneck™ Wire Mesh Sling, 3' Length
Couldn't load pickup availability
Roughneck™ Wire Mesh Sling, 6' Length
Couldn't load pickup availability
Roughneck™ Wire Mesh Sling, 6' Length
Couldn't load pickup availability
Product Description
Made with high tensile steel mesh and alloy steel end fittings, these slings are widely used in metalworking shops and steel warehouses where loads are abrasive, hot or tend to cut web slings.• Great for use in metalworking shops
• Steel construction resists abrasion and cutting
• Good flexibility and low stretch reduce load damage
• Mesh width helps control and balance loads
• Each sling proof tested and certified
The choker fitting must not be positioned against a load edge or directly on the triangle fitting.
Non-Stock items are made-to-order and are non-returnable.
Do not exceed rated capacities. Sling capacity decreases as the angle from horizontal decreases. Slings should not be used at angles of less than 30°.
Technical Specifications
| Item#: | 1417091 |
|---|---|
| Style | Triangle/Choker |
| Type | Type 1 |
| Material | Steel (10 Gauge) |
| Length | 8 ft |
| Width | 3 " |
| Rated Capacity: Vertical | 3,500 lb |
| Rated Capacity: Choker | 3,500 lb |
| Rated Capacity: Basket | 7,000 lb |
| Maximum Temperature | 550 °F |
| UNSPSC #: | 24101611 |
| TAA Compliant: | Yes |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
