Sheet Metal Screw, Dual-Drive™ Phillips/Square Hex Head, Steel, Bright Zinc Finish, 1/4 x 1"
(Pack of
100)
SKU:P69679 Item#: P69679
• Dual thread pitch design provides greater thread engagement – drives faster and easier, and holds tighter
• Self-piercing point penetrates steel plates up to 16 Ga. (pilot hole is required for 1/2" lengths)
• Special head design draws material under head for full metal engagement
• Flanged teeth virtually eliminate strip-out
• Heat-treated for higher torque without breakage or head round-out
• Resisto-Guard™ plating – up to five times the corrosion resistance of standard zinc or cadmium plating
• Reusable
Frequently Bought Together
Acorn Nut A2 Stainless Steel M6-1
$0.00
Couldn't load pickup availability
Hex Flange Nut Grade 8 Steel M8-1.25
$0.00
Couldn't load pickup availability
Sheet Metal Screw Phillips Truss Head #14 x 3/4"
$0.00
Couldn't load pickup availability
DIN 6921 Hex Flange Bolt Grade 8.8 M6-1 x 20mm
$0.00
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M10-1.25 x 50mm
$0.00
Couldn't load pickup availability
Hex Flange Bolt Grade 8 3/8-16 x 1-1/2"
$0.00
Couldn't load pickup availability
Sheet Metal Screw Square Drive Pan Head #14 x 3/4"
$0.00
Couldn't load pickup availability
Self-Drilling Screw Hex Head 1/4-14 x 1"
$0.00
Couldn't load pickup availability
Self-Drilling Screw Hex Head 1/4-14 x 1-1/4"
$0.00
Couldn't load pickup availability
Sheet Metal Screw Phillips Truss Head #10 x 3/4"
$0.00
Couldn't load pickup availability
Sheet Metal Screw Phillips Oval Head #6 x 3"
$0.00
Couldn't load pickup availability
Sheet Metal Screw Phillips Oval Head #8 x 1-1/2"
$0.00
Couldn't load pickup availability
Radiator Grille Nut M4.2-1.41
$0.00
Couldn't load pickup availability
Molding Clip with Sealer Nylon White 11.5 x 21
$0.00
Couldn't load pickup availability
Bumper Fascia Push-Type Retainer Nylon 18mm
$0.00
Couldn't load pickup availability
Twist Knot Wire Wheel 3" Dia., .014" SS Wire Dia., 1/4" Shank
$0.00
Couldn't load pickup availability
Fender Trim Molding Clip Nylon White 13 x 15mm
$0.00
Couldn't load pickup availability
Rear Bumper Fascia Grommet Nylon Gray #8
$0.00
Couldn't load pickup availability
Twist Knot Wire Wheel 3" Dia., .014" SS Wire Dia., 1/4" Shank
$0.00
Couldn't load pickup availability
Fender Trim Molding Clip Nylon White 13 x 15mm
$0.00
Couldn't load pickup availability
Rear Bumper Fascia Grommet Nylon Gray #8
$0.00
Couldn't load pickup availability
Product Description
• Dual thread pitch design provides greater thread engagement – drives faster and easier, and holds tighter• Self-piercing point penetrates steel plates up to 16 Ga. (pilot hole is required for 1/2" lengths)
• Special head design draws material under head for full metal engagement
• Flanged teeth virtually eliminate strip-out
• Heat-treated for higher torque without breakage or head round-out
• Resisto-Guard™ plating – up to five times the corrosion resistance of standard zinc or cadmium plating
• Reusable
Technical Specifications
| Item#: | P69679 |
|---|---|
| Diameter | 1/4 " |
| Length | 1 " |
| Head Style | Hex |
| Finish | Bright Zinc |
| Material | Carbon Steel |
| Drive | Phillips/Square |
| Pilot Hole | - |
| Size | 14X1 " |
| Type | Sheet Metal Screw |
| UNSPSC #: | 31161506 |
| TAA Compliant: | Yes |
| Weight: | 1.74 lb |
