Silicone Heater and Radiator Hose 1-15/16" OD
(Pack of
3)
• Use where space requirements dictate sharp bends
• Polyester and steel helix reinforcement
• Will not kink
• Low pressure service
• Lasts up to ten years
• Temperature range: –65° to +350°F (–54°C to +177°C)
• Use Silicone Heater and Hose Clamps, Item Nos. 90781, 90782, 88718 – 88727
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Catalog page#: 7-10
Frequently Bought Together
NK1237-200B0400
Couldn't load pickup availability
Silicone Heater and Radiator Hose 2-3/4" OD
Couldn't load pickup availability
Premium Heater Hose 5/8" ID x 50' Black
Couldn't load pickup availability
Slotted Hex Head Hose Clamp 301 SS 7/16 to 1"
Couldn't load pickup availability
DOT Compression Elbow Male 45° Brass 3/8 x 1/4"
Couldn't load pickup availability
Slotted Hex Head Hose Clamp 301 SS 9/16 to 1-1/4"
Couldn't load pickup availability
Slotted Hex Head Hose Clamp 301 SS 9/16 to 1-1/4"
Couldn't load pickup availability
Hose Clamp 301 SS 11/16 to 1-1/2"
Couldn't load pickup availability
Miniature Clamp SS 5/16 to 7/8"
Couldn't load pickup availability
Hose Clamp 301 SS 1/2 to 29-32"
Couldn't load pickup availability
FLEXAIR 3/8" I.D. x 50' air hose assembly w/ Industrial safety coupler
Couldn't load pickup availability
Slotted Hex Head Hose Clamp 301 SS 1-1/16 to 2"
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Fender Apron Drive Rivet 8mm Hole
Couldn't load pickup availability
Specialty Rivet with Plastic Cap Aluminum 3.2mm
Couldn't load pickup availability
Product Description
• Use where space requirements dictate sharp bends• Polyester and steel helix reinforcement
• Will not kink
• Low pressure service
• Lasts up to ten years
• Temperature range: –65° to +350°F (–54°C to +177°C)
• Use Silicone Heater and Hose Clamps, Item Nos. 90781, 90782, 88718 – 88727
Technical Specifications
| Item#: | 88706 |
|---|---|
| Type | Silicone Heater and Radiator Hose |
| I.D. | 1-1/2 " |
| Bend Radius | 3 " |
| Burst Pressure | 140 PSI |
| Hose Cover Material | Silicone |
| Hose Reinforcement | Polyester with Steel Helix |
| Temperature | -65 to +350 F |
| Category/Performance | Better Quality - 2 Ply Large Diameter - Steel Reinforced |
| UNSPSC #: | 25170000 |
| TAA Compliant: | Yes |
| Weight: | 2.0 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
