Spot Weld Remover Drill Bit, High Speed Steel, Single-Ended, 1/4(M6) x 2-1/2"
(Pack of
1)
M60 for smaller size spot welds (6mm)
Drill point is self-centering, so pre-marking is not required
Three flats on shank prevent drill from spinning in drill chuck
Straight cutting lips strengthen the outer cutting edges of the drill point
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Catalog page#: 4-6
Frequently Bought Together
Spot Weld Remover Drill Bit HSS 1/4" (M6)
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 3/8" (M10)
Couldn't load pickup availability
Abrasive Hand Pad All Purpose 6 x 9"
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 1/4" (M6)
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 3/8" (M10)
Couldn't load pickup availability
Sheet Metal Drill Bit Alloy Steel 1/4"
Couldn't load pickup availability
Acrysol Paint Preparation and Auto Body Solvent
Couldn't load pickup availability
Engine Under Cover Drive Rivet Plastic 7mm Hole
Couldn't load pickup availability
Woven Polyester Electrical Tape 19mm x 25m
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 3/8" (M10)
Couldn't load pickup availability
Spot Weld Remover Drill Bit Cobalt 5/16" (M8)
Couldn't load pickup availability
Spot Weld Remover Drill Bit 5/16" (M8)
Couldn't load pickup availability
Alu-Master 8-Way Torpedo Level
Couldn't load pickup availability
Cross-Over Socket Extension Set, 3/8" Drive, 3 Piece
Couldn't load pickup availability
Utility Knife, Folding , 4" Closed
Couldn't load pickup availability
Product Description
M60 for smaller size spot welds (6mm) Drill point is self-centering, so pre-marking is not required
Three flats on shank prevent drill from spinning in drill chuck
Straight cutting lips strengthen the outer cutting edges of the drill point
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 54454 |
|---|---|
| Type | Spot Weld Drill Bit |
| Style | Single-Ended |
| Material | HSS |
| Diameter | 1/4 " |
| Decimal Equivalent | 0.2500 " |
| Flute Type | Spiral |
| Overall Length | 2-1/2 " |
| Shank | Straight |
| UNSPSC #: | 23241606 |
| TAA Compliant: | Yes |
| Weight: | 0.03 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
