Spot Weld Remover Drill Bit HSS 3" (M10)
(Pack of
1.0)
M100 for average domestic spot welds (10mm).
• Drill point is self-centering, so pre-marking is not required
• Three flats on shank prevent drill from spinning in drill chuck
• Straight cutting lips strengthen the outer cutting edges of the drill point
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Catalog page#: 4-6
Frequently Bought Together
Stemmed Knot-Type Wire Wheel 3"
Couldn't load pickup availability
Air Saw Blade 4" 32TPI
Couldn't load pickup availability
Spot Weld Remover Drill Bit 5/16" (M8)
Couldn't load pickup availability
Sheet Metal Drill Bit Alloy Steel 5/32"
Couldn't load pickup availability
Spot Weld Remover Drill Bit
Couldn't load pickup availability
Spot Weld Remover Drill Bit 5/16" (M8)
Couldn't load pickup availability
Cowl Bumper Fender Liner/Engine Under Cover Rivet
Couldn't load pickup availability
Bumper Push-Type Retainer Nylon 18mm
Couldn't load pickup availability
Nylon Cable Tie 15-1/4" Black
Couldn't load pickup availability
Spot Weld Remover Drill Bit Cobalt 5/16" (M8)
Couldn't load pickup availability
Spot Weld Remover Drill Bit Cobalt 3/8" (M10)
Couldn't load pickup availability
Spot Weld Remover Drill Bit
Couldn't load pickup availability
Razor Blade Single Edge w/Notch
Couldn't load pickup availability
Large Index-Tend Pry Bar
Couldn't load pickup availability
Cordless Right Angle Grinder Charging Bundle
Couldn't load pickup availability
Product Description
M100 for average domestic spot welds (10mm).• Drill point is self-centering, so pre-marking is not required
• Three flats on shank prevent drill from spinning in drill chuck
• Straight cutting lips strengthen the outer cutting edges of the drill point
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 54456 |
|---|---|
| Type | Spot Weld Drill Bit |
| Style | Single-Ended |
| Material | HSS |
| Diameter | 3/8 " |
| Decimal Equivalent | 0.3750 " |
| Flute Type | Spiral |
| Overall Length | 3 " |
| Shank | Straight |
| UNSPSC #: | 23241606 |
| TAA Compliant: | Yes |
| Weight: | 0.09 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
