Threaded In-Line Flow Control Regulator, 1/4" NPT
(Pack of
5)
SKU:1198619 Item#: 1198619
In-Line Flow Control Regulators can be easily added to existing circuitry. Simply splice it into the cylinder port line. They may be used individually or, they may be stacked together using two joining clips, supplied with each valve. Panel mounting is accomplished by using the through holes in the molded body. Adjustment CharacteristicsControl is achieved gradually due to the extreme sensitivity of the adjustment screw, which allows exceptionally fine setting levels. With the use of a locking nut, the in-line flow control may be secured in its final setting. Settings are maintained even under adverse conditions such as vibration. A captive adjustment screw prevents loss or dangerous blow out. Full Flow In Both DirectionsIntake capacity is always slightly greater than the full open exhaust capacity, enabling maximum variation of speeds between outward and return strokes. Designed To Be VersatileLegris in-line flow controls are unidirectional flow control valves. Intake air flows freely through the flow control; exhaust air is metered out through a specially designed adjustment screw. An arrow on the body of the valve indicates the direction of controlled flow.
• Working temperature: 30°F to +160°F • Working pressure: 15 to 145 PSI • Sutable fluids: compressed air • Construction: – Body: glass reinforced nylon 6.6 or brass– Gripping Ring: stainless steel– Adjustment Screw: nickel-plated brass– Locking Nut: nickel-plated brass– Base: nickel-plated brass with thread sealant on tapered components
Frequently Bought Together
Engine Under Cover Drive Rivet Plastic 7mm Hole
$0.00
Couldn't load pickup availability
Cowl Bumper Fender Liner/Engine Under Cover Rivet
$0.00
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Product Description
In-Line Flow Control Regulators can be easily added to existing circuitry. Simply splice it into the cylinder port line. They may be used individually or, they may be stacked together using two joining clips, supplied with each valve. Panel mounting is accomplished by using the through holes in the molded body. Adjustment CharacteristicsControl is achieved gradually due to the extreme sensitivity of the adjustment screw, which allows exceptionally fine setting levels. With the use of a locking nut, the in-line flow control may be secured in its final setting. Settings are maintained even under adverse conditions such as vibration. A captive adjustment screw prevents loss or dangerous blow out. Full Flow In Both DirectionsIntake capacity is always slightly greater than the full open exhaust capacity, enabling maximum variation of speeds between outward and return strokes. Designed To Be VersatileLegris in-line flow controls are unidirectional flow control valves. Intake air flows freely through the flow control; exhaust air is metered out through a specially designed adjustment screw. An arrow on the body of the valve indicates the direction of controlled flow.• Working temperature: 30°F to +160°F • Working pressure: 15 to 145 PSI • Sutable fluids: compressed air • Construction: – Body: glass reinforced nylon 6.6 or brass– Gripping Ring: stainless steel– Adjustment Screw: nickel-plated brass– Locking Nut: nickel-plated brass– Base: nickel-plated brass with thread sealant on tapered components
Technical Specifications
| Item#: | 1198619 |
|---|---|
| Manufacturer Model #: | 7775 14 14 |
| Style | Flow Control Regulator |
| Configuration | Threaded In-Line |
| Thread Size | 1/4 " |
| Thread Style | NPT |
| Material | Nylon |
| Wrench Size | 16 mm |
| Locknut Wrench Size | 11 mm |
| Working Pressure | 15 to 145 PSI |
| Temperature Range | 30 to 160 °F |
| UNSPSC #: | 40183100 |
| TAA Compliant: | No |