Threaded Pressure Regulator, 6mm Tube, 1/4" BSPP
(Pack of
1)
SKU:1197484 Item#: 1197484
Legris pressure regulator fittings are used to stabilize at a given value the pressure applied to pneumatic equipment, whatever the fluctuations of pressure upstream. The pressure outlet is fully controlled by an adjustment screw. To assist pressure selection, the screw is calibrated showing pressure setting levels. Adjusting pressure to a sufficient value provides a saving of compressed air and therefore energy. Consequently, when mounted in series on a manifold, these fittings control the supply required for each piece of equipment, from a single supply source.
• Input Pressure: 15 to 230 PSI • Regulated Pressure: 15 to 115 PSI• Temperature Range: 15°F to 160°F • Sutable fluids: compressed air • Construction: – Body: polymer, nickel-plated brass– Seals: nitrile– Base: nickel-plated brass with thread sealant on tapered components
Compact, flow pressure regulators may be mounted:- On the cylinder, for reduced pressure in one direction- On the control valve, for reduced pressure in both directions
Frequently Bought Together
Rear Bumper Cover Retainer Plastic 18mm
$0.00
Couldn't load pickup availability
Bumper and Wheel Well Liner Push-Type Retainer
$0.00
Couldn't load pickup availability
Fender Apron Drive Rivet 8mm Hole
$0.00
Couldn't load pickup availability
Product Description
Legris pressure regulator fittings are used to stabilize at a given value the pressure applied to pneumatic equipment, whatever the fluctuations of pressure upstream. The pressure outlet is fully controlled by an adjustment screw. To assist pressure selection, the screw is calibrated showing pressure setting levels. Adjusting pressure to a sufficient value provides a saving of compressed air and therefore energy. Consequently, when mounted in series on a manifold, these fittings control the supply required for each piece of equipment, from a single supply source.• Input Pressure: 15 to 230 PSI • Regulated Pressure: 15 to 115 PSI• Temperature Range: 15°F to 160°F • Sutable fluids: compressed air • Construction: – Body: polymer, nickel-plated brass– Seals: nitrile– Base: nickel-plated brass with thread sealant on tapered components
Compact, flow pressure regulators may be mounted:- On the cylinder, for reduced pressure in one direction- On the control valve, for reduced pressure in both directions
Technical Specifications
| Item#: | 1197484 |
|---|---|
| Manufacturer Model #: | 7300 06 13 |
| Style | Pressure Regulator |
| Configuration | Threaded Pressure Regulator |
| Tube Size | 6 mm |
| Thread Size | G1/4 " |
| Thread Style | BSPP |
| Material | Nylon Body, Nickel-Plated Brass Screw |
| Wrench Size | 17 mm |
| Locknut Wrench Size | 13 mm |
| Thread Length | 7.5 mm |
| Working Pressure | 15 to 230 PSI |
| Temperature Range | 15 to 160 °F |
| UNSPSC #: | 40183100 |
| TAA Compliant: | No |