Threaded Pressure Regulator, 1/4" Tube, 1/8" NPT
(Pack of
1)
SKU:1198970 Item#: 1198970
Legris pressure regulator fittings are used to stabilize at a given value the pressure applied to pneumatic equipment, whatever the fluctuations of pressure upstream. The pressure outlet is fully controlled by an adjustment screw. To assist pressure selection, the screw is calibrated showing pressure setting levels. Adjusting pressure to a sufficient value provides a saving of compressed air and therefore energy. Consequently, when mounted in series on a manifold, these fittings control the supply required for each piece of equipment, from a single supply source.
• Input Pressure: 15 to 230 PSI • Regulated Pressure: 15 to 115 PSI• Temperature Range: 15°F to 160°F • Sutable fluids: compressed air • Construction: – Body: polymer, nickel-plated brass– Seals: nitrile– Base: nickel-plated brass with thread sealant on tapered components
Compact, flow pressure regulators may be mounted:- On the cylinder, for reduced pressure in one direction- On the control valve, for reduced pressure in both directions
Frequently Bought Together
Rocker Panel Molding Clip Nylon White 12 x 20mm
$0.00
Couldn't load pickup availability
Front/Rear Bumper Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Bumper Clip Push-Type Retainer Nylon 18mm
$0.00
Couldn't load pickup availability
Product Description
Legris pressure regulator fittings are used to stabilize at a given value the pressure applied to pneumatic equipment, whatever the fluctuations of pressure upstream. The pressure outlet is fully controlled by an adjustment screw. To assist pressure selection, the screw is calibrated showing pressure setting levels. Adjusting pressure to a sufficient value provides a saving of compressed air and therefore energy. Consequently, when mounted in series on a manifold, these fittings control the supply required for each piece of equipment, from a single supply source.• Input Pressure: 15 to 230 PSI • Regulated Pressure: 15 to 115 PSI• Temperature Range: 15°F to 160°F • Sutable fluids: compressed air • Construction: – Body: polymer, nickel-plated brass– Seals: nitrile– Base: nickel-plated brass with thread sealant on tapered components
Compact, flow pressure regulators may be mounted:- On the cylinder, for reduced pressure in one direction- On the control valve, for reduced pressure in both directions
Technical Specifications
| Item#: | 1198970 |
|---|---|
| Manufacturer Model #: | 7305 56 11 |
| Style | Pressure Regulator |
| Configuration | Threaded Pressure Regulator |
| Tube Size | 1/4 " |
| Thread Size | 1/8 " |
| Thread Style | NPT |
| Material | Nylon Body, Nickel-Plated Brass Screw |
| Wrench Size | 17 mm |
| Locknut Wrench Size | 13 mm |
| Working Pressure | 15 to 230 PSI |
| Temperature Range | 15 to 160 °F |
| UNSPSC #: | 40183100 |
| TAA Compliant: | No |