Tite-Seal Cord Grip, PG-9, Accommodates THW/AWM/MTW-12-8 AWG, THHN-8-2 AWG, SJO-18/2
(Pack of
10)
• Impact, abrasion and cut-through resistant housing helps protect the wire or cable from abrasion or cuts caused by the sharp edges of an electrical panel box
• Strain Relief – Flexible “tail” spreads wire, bending stress over a long length and increasing the life of the cord
• Strong Grip – Internal segmented flange and ratchet lock hold wire or cable secure to panel box
• Resistant to corrosion and weathering
• Versatile – Can be used in standard electrical knockouts, drilled holes or threaded holes
Technical Information
• Temperature range: –22°F to +212°F (–30°C to +100°C)
• Chemical resistance: Salt water, weak acids, gasoline, alcohol, oil, grease and common solvents
NOTE: Maximum voltage rating in USA 600V; in Canada 32V.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together
Miniature Incandescent Bulb 12V 2CP
Couldn't load pickup availability
Halogen Miniature Bulb 65W 12V
Couldn't load pickup availability
H8 Halogen Miniature Bulb 35W 12V
Couldn't load pickup availability
Cowl Bumper Fender Liner/Engine Under Cover Rivet
Couldn't load pickup availability
Front Bumper Trim Panel/Running Board Split Rivet
Couldn't load pickup availability
Rocker Panel Molding Clip Nylon White 12 x 20mm
Couldn't load pickup availability
Tite-Seal II Cord and Cable Grip 1/2" NPT
Couldn't load pickup availability
Tite-Seal II Cord and Cable Grip PG-9
Couldn't load pickup availability
Tite-Seal II Cord and Cable Grip PG-7
Couldn't load pickup availability
Super 88 Series Vinyl Electrical Tape Black 3/4"
Couldn't load pickup availability
Rubber Grommet 5/8" ID
Couldn't load pickup availability
Rubber Grommet 1/2" ID
Couldn't load pickup availability
Product Description
• Impact, abrasion and cut-through resistant housing helps protect the wire or cable from abrasion or cuts caused by the sharp edges of an electrical panel box• Strain Relief – Flexible “tail” spreads wire, bending stress over a long length and increasing the life of the cord
• Strong Grip – Internal segmented flange and ratchet lock hold wire or cable secure to panel box
• Resistant to corrosion and weathering
• Versatile – Can be used in standard electrical knockouts, drilled holes or threaded holes
Technical Information
• Temperature range: –22°F to +212°F (–30°C to +100°C)
• Chemical resistance: Salt water, weak acids, gasoline, alcohol, oil, grease and common solvents
NOTE: Maximum voltage rating in USA 600V; in Canada 32V.
Technical Specifications
| Item#: | P25130 |
|---|---|
| Wire Diameter | 0.157 - 0.314 " |
| Wire or Cable Size Accommodated | THW/AWM/MTW-12-8 AWG, THHN-8-2 AWG, SJO-18/2 |
| Hole Diameter | 0.599 " |
| Knockout Size | 3/8 " |
| Threaded Hole Size | PG-9 |
| Voltage Rating | 600 V |
| Temperature Range | -22 to 212 °F |
| Style | Tite-seal Cord Grips |
| Type | Strain Relief Connectors |
| UNSPSC #: | 39121719 |
| TAA Compliant: | Yes |
| Weight: | 0.34 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
