Flat Washer, USS, Thru-Hardened, Steel, Zinc Finish, 29/64" ID, 1-1/4" OD, 7/64" Thickness, 7/16"
(Pack of
100)
• Designed and engineered for use with Tru-Torq® and Tuff-Torq® fastening systems
• Greater thickness with more closely held tolerances than standard washers – tight inside diameter tolerance prevents system mismatch
• Smooth bearing surfaces
• Manufacturing lot control traceability
• Hardened and tempered; will support 180,000 PSI minimum strength
• Exceeds SAE and ASTM F436 specifications
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Catalog page#: 11-11
Frequently Bought Together
Hex Flange Bolt Grade 10.9 M6-1 x 16mm
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M8-1.25 x 20mm
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M6-1 x 12mm
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 5/16"
Couldn't load pickup availability
Flat Washer Grade 12 Thru-Hardened Steel M6
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 7/16"
Couldn't load pickup availability
Fender Apron Drive Rivet 8mm Hole
Couldn't load pickup availability
Acrysol Paint Preparation and Auto Body Solvent
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
DIN 127B Standard Lock Washer M8
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 5/16"
Couldn't load pickup availability
Fender Washer Standard Steel 1"
Couldn't load pickup availability
Product Description
• Designed and engineered for use with Tru-Torq® and Tuff-Torq® fastening systems• Greater thickness with more closely held tolerances than standard washers – tight inside diameter tolerance prevents system mismatch
• Smooth bearing surfaces
• Manufacturing lot control traceability
• Hardened and tempered; will support 180,000 PSI minimum strength
• Exceeds SAE and ASTM F436 specifications
Technical Specifications
| Item#: | 88448 |
|---|---|
| Nominal Size | 7/16 " |
| Grade | Thru-Hardened |
| Finish | Bright Zinc |
| Type | Flat Washer |
| I.D. | 29/64 " |
| O.D. | 1-1/4 " |
| Thickness | 7/64 " |
| Material | Carbon Steel |
| Minimum Thickness | .090 " |
| Maximum Thickness | .106 " |
| Pattern | USS |
| Quantity Per Package | 100.0000 |
| UNSPSC #: | 31161807 |
| TAA Compliant: | Yes |
| Weight: | 3.01 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
