9/16" Dia. Fractional Drill Bit with Reduced 1/2" Shank, 118o Point, W/Flats, 6" Overall Length, Silver & Black
(Pack of
1)
SKU:PM08200358 Item#: PM08200358
• Manufactured from molybdenum high speed tool steel for long life
• 1/2" reduced shank with flats - can be used in keyed or keyless chucks without slipping
• Silver with black-oxide flutes to hold lubricant at the cutting surface
• 118° point for fast cutting
• Available in an eight piece assortment for sizes 9/16" to 1" in. 1/16" increments
Specifications
• Material: Molybdenum high speed steel
• Finish: Silver and black-oxide
• Point: 118° standard
• Overall Length: 6"
• Max. Depth of Cut: 2.1"
• Length of Flats on Shank: 1"
• Shank Diameter: 1/2"
Applications
Steel, aluminum, cast steel, copper, brass, malleable iron, bronze, cast iron
Note: A pilot hole is recommended when using reduced shank bits
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Sheet Metal Drill Bit Alloy Steel 5/32"
Couldn't load pickup availability
Reinforced Mini Cut-Off Wheel 3"
Couldn't load pickup availability
Spot Weld Remover Drill Bit Cobalt 5/16" (M8)
Couldn't load pickup availability
Jobber Length Drill Bit HSS 3/16"
Couldn't load pickup availability
Spot Weld Remover Drill Bit Bundle 11Pcs
Couldn't load pickup availability
Spot Weld Remover Drill Bit
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 18mm
Couldn't load pickup availability
Hex Head Sheet Metal Screw with 16mm Washer Steel
Couldn't load pickup availability
Air Distributor Defroster Push-Type Retainer
Couldn't load pickup availability
Cryoboost 7/8" Reduced Shank, Stepped Split Point
Couldn't load pickup availability
Silver & Deming Drill Bit
Couldn't load pickup availability
Silver and Deming Drill Bit HSS 14mm
Couldn't load pickup availability
Met 24mm, Cross-Torque Wrench
Couldn't load pickup availability
Universal Socket Set, SAE, 3/8" Drive, 8pc
Couldn't load pickup availability
Razor Blade Single Edge w/Notch
Couldn't load pickup availability
Twist Knot Wire Wheel 3" Dia., .014" SS Wire Dia., 1/4" Shank
Couldn't load pickup availability
Rocker Panel Molding Clip Nylon Red
Couldn't load pickup availability
Rocker and Quarter Molding Retainer Plastic
Couldn't load pickup availability
Twist Knot Wire Wheel 3" Dia., .014" SS Wire Dia., 1/4" Shank
Couldn't load pickup availability
Rocker Panel Molding Clip Nylon Red
Couldn't load pickup availability
Rocker and Quarter Molding Retainer Plastic
Couldn't load pickup availability
Product Description
• Manufactured from molybdenum high speed tool steel for long life• 1/2" reduced shank with flats - can be used in keyed or keyless chucks without slipping
• Silver with black-oxide flutes to hold lubricant at the cutting surface
• 118° point for fast cutting
• Available in an eight piece assortment for sizes 9/16" to 1" in. 1/16" increments
Specifications
• Material: Molybdenum high speed steel
• Finish: Silver and black-oxide
• Point: 118° standard
• Overall Length: 6"
• Max. Depth of Cut: 2.1"
• Length of Flats on Shank: 1"
• Shank Diameter: 1/2"
Applications
Steel, aluminum, cast steel, copper, brass, malleable iron, bronze, cast iron
Note: A pilot hole is recommended when using reduced shank bits
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | PM08200358 |
|---|---|
| Drill Length | Silver & Deming |
| Drill Type | Fractional |
| Type | General Purpose |
| Material | High Speed Steel |
| Finish | Silver & Black |
| Diameter | 9/16 " |
| Decimal Equivalent | 0.5625 " |
| Point | 118 ° |
| Shank Size | 1/2 " |
| Flats | 3 |
| Overall Length | 6 " |
| UNSPSC #: | 23241636 |
| TAA Compliant: | No |
| Weight: | 0.315 lb |
