43/64" Dia. Fractional Drill Bit with Reduced 1/2" Shank, 118o Point, W/Flats, 6" Overall Length, Silver & Black
(Pack of
1)
• Manufactured from molybdenum high speed tool steel for long life
• 1/2" reduced shank with flats - can be used in keyed or keyless chucks without slipping
• Silver with black-oxide flutes to hold lubricant at the cutting surface
• 118° point for fast cutting
• Available in an eight piece assortment for sizes 9/16" to 1" in. 1/16" increments
Specifications
• Material: Molybdenum high speed steel
• Finish: Silver and black-oxide
• Point: 118° standard
• Overall Length: 6"
• Max. Depth of Cut: 2.1"
• Length of Flats on Shank: 1"
• Shank Diameter: 1/2"
Applications
Steel, aluminum, cast steel, copper, brass, malleable iron, bronze, cast iron
Note: A pilot hole is recommended when using reduced shank bits
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together
Twist Knot Wire Wheel 3" Dia., .014" Wire Dia., 1/4" Shank
Couldn't load pickup availability
Scotch-Brite Roloc Bristle Disc 2"
Couldn't load pickup availability
Reinforced Mini Cut-Off Wheel 4"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 17/64"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 15/32"
Couldn't load pickup availability
Jobber Length Drill Bit HSS 3/16"
Couldn't load pickup availability
Wheel House Molding Split Rivet Aluminum 3/16"
Couldn't load pickup availability
Radiator Grille Nut M4.2-1.41
Couldn't load pickup availability
Bumper Drive Rivet Plastic 10mm Hole
Couldn't load pickup availability
Silver and Deming Drill Bit HSS 1/2"
Couldn't load pickup availability
Silver and Deming Drill Bit HSS 41/64"
Couldn't load pickup availability
Silver and Deming Drill Bit HSS 15/16"
Couldn't load pickup availability
Cryobit 1/8" Dia. Maintenance Drill Bit , 135o Split Point, No Flats
Couldn't load pickup availability
Spot Weld Remover Drill Bit 5/16" (M8)
Couldn't load pickup availability
18V Impact Wrench Kit
Couldn't load pickup availability
Product Description
• Manufactured from molybdenum high speed tool steel for long life• 1/2" reduced shank with flats - can be used in keyed or keyless chucks without slipping
• Silver with black-oxide flutes to hold lubricant at the cutting surface
• 118° point for fast cutting
• Available in an eight piece assortment for sizes 9/16" to 1" in. 1/16" increments
Specifications
• Material: Molybdenum high speed steel
• Finish: Silver and black-oxide
• Point: 118° standard
• Overall Length: 6"
• Max. Depth of Cut: 2.1"
• Length of Flats on Shank: 1"
• Shank Diameter: 1/2"
Applications
Steel, aluminum, cast steel, copper, brass, malleable iron, bronze, cast iron
Note: A pilot hole is recommended when using reduced shank bits
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | PM08200365 |
|---|---|
| Drill Length | Silver & Deming |
| Drill Type | Fractional |
| Type | General Purpose |
| Material | High Speed Steel |
| Finish | Silver & Black |
| Diameter | 43/64 " |
| Decimal Equivalent | 0.6719 " |
| Point | 118 ° |
| Shank Size | 1/2 " |
| Flats | 3 |
| Overall Length | 6 " |
| UNSPSC #: | 23241636 |
| TAA Compliant: | No |
| Weight: | 0.39 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
