6" x 0.040" x 1" Shredder Reciprocating Saw Blades,6T/10T Double Tooth
(Pack of
3.0)
• Cuts wood and metal
• Designed to cut both directions
• Durable – Bi-metal construction for tough cuts
• HSS Edge for long life
• Plunge cuts easily – Eliminates drilling a starting hole
• Cuts nail embedded wood easily
Specifications
• Material: Bi-Metal Construction
• Cutting Edges: 62RC Molybdenum HSS
• Backing: ASIS 6150 Alloy Steel
Instructions Recip Saw Information:
Some reciprocating saws offer two cutting modes: metal mode and wood (orbital mode). In metal mode, the blade moves straight in and straight out. In wood or orbital mode, the blade moves in and out in an orbital or elliptical fashion.
For Best Results:
• Plunging - Use Wood or Orbital Mode
• Cutting with Bottom Teeth - Use Wood or Orbital Mode
• Cutting with Top Teeth - Use Metal Mode
Directions for Use:
1. Insert blade in saw like any regular reciprocating saw blade
2. Lock blade into collet
3. Hold the reciprocating saw so that the rounded tip of the blade makes contact with the wooden surface where the plunge will occur
4. Hold a 30° - 45° angle to the surface of the wood with the teeth touching the wood (maintain that angle until a full plunge is achieved)
5. Start the reciprocating saw at about 2/3 speed
6. Push and pull back and forth, in 2" – 3" long total stroke length and maintaining a downward pressure
NOTE: The 2" - 3" stroke will help to prevent the tip of the blade from bumping (or bottoming out) in the groove
7. Keep working the blade in that fashion up until the plunge occurs
8. When the through plunge occurs, gradually raise the saw to 90° for cutting
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together
Air Saw Blade 4" 32TPI
Couldn't load pickup availability
Curved Wood Handle Scratch Brush
Couldn't load pickup availability
Cryobit 1/4" Dia. Maintenance Drill Bit , 135o Split Point, W/ Flats
Couldn't load pickup availability
Gold Reciprocating Blade 9"
Couldn't load pickup availability
Laser Reciprocating Blade 6" 10TPI
Couldn't load pickup availability
Demolition Reciprocating Blade 9"
Couldn't load pickup availability
Bandsaw Blade 10/14 TPI 133"
Couldn't load pickup availability
Bandsaw Blade 8/12 TPI 120"
Couldn't load pickup availability
M42 Bimetal Bandsaw Blade Medium TPI 147"
Couldn't load pickup availability
Bumper Push-Type Retainer Nylon 18mm
Couldn't load pickup availability
Drive Rivet Nylon M8
Couldn't load pickup availability
Metric Indented Hex Head Bolt with 17mm Washer
Couldn't load pickup availability
Large Index-Tend Pry Bar
Couldn't load pickup availability
Cordless Right Angle Grinder Charging Bundle
Couldn't load pickup availability
Aluminum Oxide Grain Locking Grinding Disc 2"
Couldn't load pickup availability
Product Description
• Cuts wood and metal• Designed to cut both directions
• Durable – Bi-metal construction for tough cuts
• HSS Edge for long life
• Plunge cuts easily – Eliminates drilling a starting hole
• Cuts nail embedded wood easily
Specifications
• Material: Bi-Metal Construction
• Cutting Edges: 62RC Molybdenum HSS
• Backing: ASIS 6150 Alloy Steel
Instructions Recip Saw Information:
Some reciprocating saws offer two cutting modes: metal mode and wood (orbital mode). In metal mode, the blade moves straight in and straight out. In wood or orbital mode, the blade moves in and out in an orbital or elliptical fashion.
For Best Results:
• Plunging - Use Wood or Orbital Mode
• Cutting with Bottom Teeth - Use Wood or Orbital Mode
• Cutting with Top Teeth - Use Metal Mode
Directions for Use:
1. Insert blade in saw like any regular reciprocating saw blade
2. Lock blade into collet
3. Hold the reciprocating saw so that the rounded tip of the blade makes contact with the wooden surface where the plunge will occur
4. Hold a 30° - 45° angle to the surface of the wood with the teeth touching the wood (maintain that angle until a full plunge is achieved)
5. Start the reciprocating saw at about 2/3 speed
6. Push and pull back and forth, in 2" – 3" long total stroke length and maintaining a downward pressure
NOTE: The 2" - 3" stroke will help to prevent the tip of the blade from bumping (or bottoming out) in the groove
7. Keep working the blade in that fashion up until the plunge occurs
8. When the through plunge occurs, gradually raise the saw to 90° for cutting
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | PM08220020 |
|---|---|
| Type | General Purpose |
| Length | 6 " |
| Width | 1 " |
| Thickness | 0.040 " |
| Teeth per Inch | 6-10 |
| UNSPSC #: | 27112802 |
| TAA Compliant: | No |
| Weight: | 0.21 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
