Abrasive Roll 2" x 15'
(Pack of
1.0)
• Heavy non-woven material, impregnated with abrasive grain and bonded with synthetic resins
• Long-lasting – resists tearing, splintering and shedding
• Can be used wet or dry
• Washable and reusable
• Light-Duty – use for fine finishing of metals, plastics and fiberglass surfaces, cleaning molds, polishing dies, and rubbing down primer surface coats
• Ideal for removing rust and corrosion, and cleaning and preparing surfaces
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Catalog page#: 3-5
Frequently Bought Together
Spot Weld Remover Drill Bit Cobalt 3/8" (M10)
Couldn't load pickup availability
Spot Weld Remover Drill Bit Kit 11Pcs
Couldn't load pickup availability
Spot Weld Remover Drill Bit 5/16" (M8)
Couldn't load pickup availability
Abrasive Roll 2" x 15'
Couldn't load pickup availability
Abrasive Roll 4" x 30'
Couldn't load pickup availability
Abrasive Roll 4" x 30'
Couldn't load pickup availability
Waterproof Abrasive Shop Roll Sandpaper 25yd
Couldn't load pickup availability
1-1/2" x 50 Yds. Abrasive Shop Roll, 120 Grit, Aluminum Oxide
Couldn't load pickup availability
Lion's Tongue 1-1/2" x 75' Open Mesh Abrasive Roll, 180 Grit
Couldn't load pickup availability
Wheel House Molding Split Rivet Aluminum 3/16"
Couldn't load pickup availability
Front Fender Liner Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Hex Head Sheet Metal Screw with 16mm Washer Steel
Couldn't load pickup availability
Scotch-Brite Roloc Bristle Disc 2"
Couldn't load pickup availability
Scotch-Brite Roloc Bristle Disc 2"
Couldn't load pickup availability
Abrasive Bristle Wire Belt Steel 23mm
Couldn't load pickup availability
Product Description
• Heavy non-woven material, impregnated with abrasive grain and bonded with synthetic resins• Long-lasting – resists tearing, splintering and shedding
• Can be used wet or dry
• Washable and reusable
• Light-Duty – use for fine finishing of metals, plastics and fiberglass surfaces, cleaning molds, polishing dies, and rubbing down primer surface coats
• Ideal for removing rust and corrosion, and cleaning and preparing surfaces
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Technical Specifications
| Item#: | 28760 |
|---|---|
| Type | Light-Duty |
| Grain | Silicon Carbide |
| Grade | Micro-Fine |
| Grit | 1200 |
| Color | Gray |
| Length | 15 ft |
| Width | 2 " |
| UNSPSC #: | 31191516 |
| TAA Compliant: | Yes |
| Weight: | 0.55 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
