Countersink for Chamfering or Deburring, 82° Double End Single Flute, #0 to #4 Screws, 1/4 x 2"
(Pack of
1)
SKU:97620 Item#: 97620
• 82° included angle
• Single cutting edge provides fast stock removal; finishes chatter-free
• Finish reduces chip build-up on cutting edge
• Recommended RPM is half the nominal drilling speed
• Designed for general-purpose countersinking, chamfering or deburring
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Frequently Bought Together
Cryocut 1/8" Body Dia. 82o Angle Countersink, 1-Flute
Couldn't load pickup availability
Countersink 82° Single Flute 9/16"
Couldn't load pickup availability
Countersink 82° Single Flute 5/8"
Couldn't load pickup availability
Cryocut 1/8" Body Dia. 90o Angle Countersink, 1-Flute
Couldn't load pickup availability
Chatterless Countersink Kit 4Pcs 82° Single Flute
Couldn't load pickup availability
Cryocut 3/4" Body Dia. 90o Angle Countersink, 3-Flute
Couldn't load pickup availability
Fire and Rescue Reciprocating Blade 6"
Couldn't load pickup availability
M2 Sheet Metal Hole Cutter 3/8"
Couldn't load pickup availability
General Purpose Reciprocating Saw Blade 8"
Couldn't load pickup availability
Front Rear Bumper Specialty Rivet 3.2mm
Couldn't load pickup availability
Miniature Incandescent Bulb 12V 2CP
Couldn't load pickup availability
Radiator Grille Nut M4.2-1.41
Couldn't load pickup availability
Spot Weld Remover Drill Bit 5/16" (M8)
Couldn't load pickup availability
Double Flute Step Drill Bit 1/8 to 1/2"
Couldn't load pickup availability
Polymer Wheel Rubber Eraser 30mm
Couldn't load pickup availability
Product Description
• 82° included angle• Single cutting edge provides fast stock removal; finishes chatter-free
• Finish reduces chip build-up on cutting edge
• Recommended RPM is half the nominal drilling speed
• Designed for general-purpose countersinking, chamfering or deburring
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 97620 |
|---|---|
| Type | Countersink |
| Body Diameter | 1/4 " |
| Flutes | Single |
| Included Angle | 82 ° |
| Shank Size | 1/4 " |
| Overall Length | 2 " |
| For Screw Size | No. 0 - No. 4 |
| Cutting Diameter Min. | 0.09 " |
| Cutting Diameter Max. | 0.23 " |
| UNSPSC #: | 23241603 |
| TAA Compliant: | Yes |
| Weight: | 0.03 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
