Chatterless Countersink 82° Six Flute 3/16"
(Pack of
1.0)
Centerline Angle 41°, Included Angle 82°
• Staggered cutting edges inhibit the occurrence of resonant or harmonic vibration
• No break-in period required
• Made of M2 high-speed steel
• Made in USA
41° Centerline Angle
• Can be used in drill presses, screw machines, automatics, lathes, hand tools or special set-ups
NOTE: Use of a good quality cutting fluid is recommended.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Frequently Bought Together
Chatterless Countersink 82° Six Flute 1"
Couldn't load pickup availability
Chatterless Countersink 82° Six Flute 5/16"
Couldn't load pickup availability
Chatterless Countersink 82° Six Flute 1/4"
Couldn't load pickup availability
Cryocut 1/8" Body Dia. 100o Angle Countersink, 1-Flute
Couldn't load pickup availability
Cryocut 1/2" Body Dia. 100o Angle Countersink, 3-Flute
Couldn't load pickup availability
Cryocut 5/8" Body Dia. 100o Angle Countersink, 3-Flute
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 2-13/16(M8)
Couldn't load pickup availability
Sheet Metal Drill Bit Alloy Steel 1/8"
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 1/4" (M6)
Couldn't load pickup availability
Acrysol Paint Preparation and Auto Body Solvent
Couldn't load pickup availability
Bumper and Wheel Well Liner Push-Type Retainer
Couldn't load pickup availability
High-Tech Seam Sealer Clear 5fl.oz
Couldn't load pickup availability
Utility Knife, Folding , 4" Closed
Couldn't load pickup availability
12" Auto-Adjust Pliers
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 2-13/16(M8)
Couldn't load pickup availability
Product Description
Centerline Angle 41°, Included Angle 82°• Staggered cutting edges inhibit the occurrence of resonant or harmonic vibration
• No break-in period required
• Made of M2 high-speed steel
• Made in USA
41° Centerline Angle
• Can be used in drill presses, screw machines, automatics, lathes, hand tools or special set-ups
NOTE: Use of a good quality cutting fluid is recommended.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 57139 |
|---|---|
| Type | Countersink |
| Body Diameter | 3/16 " |
| Flutes | Six |
| Included Angle | 82 ° |
| Shank Size | 3/16 " |
| Shank Length | 1-1/2 " |
| Overall Length | 1-1/2 " |
| For Screw Size | No. 00 - No. 2 |
| Maximum RPM (Aluminum) | 2,850 RPM |
| Maximum RPM (Cast Iron or Mild Steel) | 1,420 RPM |
| Centerline Angle | 41 ° |
| UNSPSC #: | 23241603 |
| TAA Compliant: | Yes |
| Weight: | 0.025 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
