CryoBore 1-1/8" Dia. Annular Cutter, 1-3/16" Cutting Depth
(Pack of
1.0)
• Fast - Advanced multiple cutting edges have a special geometry and kerf angle that reduces loading and increases cutting speeds
• Lower Heat - The thinner moly/cobalt cutting edges produce less frictional heat
• Long Life - Cryophase™ treatment extends tool life in tough cutting like structural and truck frame steel without pre-drilling
• Weldon shank fits most mag drills
Specifications
• Cryophase™: Thermal cycling cryogenic treatment
• Material: Modified moly/cobalt tool steel
• Cutting Tooth Hardness: 64-65Rc
Note: Pins not included with individual cutters.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Frequently Bought Together
HSS Annular Cutter 1-1/16"
Couldn't load pickup availability
CryoBore 1-1/8" Dia. Annular Cutter, 2-3/8" Cutting Depth
Couldn't load pickup availability
CryoBore 9/16" Dia. Annular Cutter, 1-3/16" Cutting Depth
Couldn't load pickup availability
HSS Annular Cutter 2-1/16"
Couldn't load pickup availability
HSS Annular Cutter 1-1/16"
Couldn't load pickup availability
CryoBore 1-1/8" Dia. Annular Cutter, 2-3/8" Cutting Depth
Couldn't load pickup availability
Abrasive Bristle Wire Belt Steel 23mm
Couldn't load pickup availability
Scotch-Brite Roloc Bristle Disc 2"
Couldn't load pickup availability
Polymer Wheel Rubber Eraser 30mm
Couldn't load pickup availability
Bumper Fascia General Purpose Split Rivet 3/16"
Couldn't load pickup availability
Woven Polyester Electrical Tape 19mm x 25m
Couldn't load pickup availability
Bumper Push-Type Retainer Nylon 18mm
Couldn't load pickup availability
Hex Key Set, Balldriver, Ball Hex, 9pc
Couldn't load pickup availability
Sheet Metal Drill Bit Alloy Steel 1/4"
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 3/8" (M10)
Couldn't load pickup availability
Product Description
• Fast - Advanced multiple cutting edges have a special geometry and kerf angle that reduces loading and increases cutting speeds• Lower Heat - The thinner moly/cobalt cutting edges produce less frictional heat
• Long Life - Cryophase™ treatment extends tool life in tough cutting like structural and truck frame steel without pre-drilling
• Weldon shank fits most mag drills
Specifications
• Cryophase™: Thermal cycling cryogenic treatment
• Material: Modified moly/cobalt tool steel
• Cutting Tooth Hardness: 64-65Rc
Note: Pins not included with individual cutters.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | DY81863800 |
|---|---|
| Cutting Diameter | 1-1/8 " |
| Depth of Cut | 1-3/16 " |
| Tooth Material | Moly/Cobalt |
| UNSPSC #: | 23241600 |
| TAA Compliant: | No |
| Weight: | 0.295 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
