CryoBore 1-7/16" Dia. Annular Cutter, 2-3/8" Cutting Depth
(Pack of
1)
SKU:DY81874050 Item#: DY81874050
• Fast - Advanced multiple cutting edges have a special geometry and kerf angle that reduces loading and increases cutting speeds
• Lower Heat - The thinner moly/cobalt cutting edges produce less frictional heat
• Long Life - Cryophase™ treatment extends tool life in tough cutting like structural and truck frame steel without pre-drilling
• Weldon shank fits most mag drills
Specifications
• Cryophase™: Thermal cycling cryogenic treatment
• Material: Modified moly/cobalt tool steel
• Cutting Tooth Hardness: 64-65Rc
Note: Pins not included with individual cutters.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Frequently Bought Together
7/16" Dia. Annular Cutter, 1" Cutting Depth, Pin Not Included
$0.00
Couldn't load pickup availability
HSS Annular Cutter 1-3/16"
$0.00
Couldn't load pickup availability
CryoBore 1-1/16" Dia. Annular Cutter, 2-3/8" Cutting Depth
$0.00
Couldn't load pickup availability
Annular Cutter Center Pin 1/2 to 2-3/8"
$0.00
Couldn't load pickup availability
Annular Cutter Center Pin 1/2 to 2-3/8"
$0.00
Couldn't load pickup availability
Large Portable Magnetic Drill 2"
$0.00
Couldn't load pickup availability
Stemmed Knot-Type Wire Wheel 3-1/4"
$0.00
Couldn't load pickup availability
Scotch-Brite Roloc Bristle Disc 2"
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit Cobalt 5/16" (M8)
$0.00
Couldn't load pickup availability
Plier Long Chain Nose with Side Cutter 7-1/2"
$0.00
Couldn't load pickup availability
10" Dual Jaw Adj and Pipe Wrench
$0.00
Couldn't load pickup availability
Quick Seal 2000 Sprayable Seam Sealer Black
$0.00
Couldn't load pickup availability
Air Distributor Defroster Push-Type Retainer
$0.00
Couldn't load pickup availability
Fender Liner Screw Grommet Nylon M5.5
$0.00
Couldn't load pickup availability
Nylon Cable Tie 15-1/4" Black
$0.00
Couldn't load pickup availability
Spinning Handmaster Driver Set 5Pc Set
$0.00
Couldn't load pickup availability
Twist-On Abrasive Disc 2"
$0.00
Couldn't load pickup availability
1/4" - 3/4" Cryonitride Spiral Fluted Step Drill - 3/8" Shank
$0.00
Couldn't load pickup availability
Product Description
• Fast - Advanced multiple cutting edges have a special geometry and kerf angle that reduces loading and increases cutting speeds• Lower Heat - The thinner moly/cobalt cutting edges produce less frictional heat
• Long Life - Cryophase™ treatment extends tool life in tough cutting like structural and truck frame steel without pre-drilling
• Weldon shank fits most mag drills
Specifications
• Cryophase™: Thermal cycling cryogenic treatment
• Material: Modified moly/cobalt tool steel
• Cutting Tooth Hardness: 64-65Rc
Note: Pins not included with individual cutters.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | DY81874050 |
|---|---|
| Cutting Diameter | 1-7/16 " |
| Depth of Cut | 2-3/8 " |
| Tooth Material | Moly/Cobalt |
| UNSPSC #: | 23241600 |
| TAA Compliant: | No |
| Weight: | 0.53 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
