Cryocut 1" Body Dia. 82o Angle Countersink, 3-Flute
(Pack of
1.0)
• Three-flute center reamers cut countersinks and recesses for extisting holes
• Cryophase™ treatment extends the wear resistance and useful life of these high speed steel countersinks
• 82°, 90° and 100° angles cover countersink requirements for most common fastener head styles
Specifications
• Material: High Speed Steel
• Hardness: 64-66Rc
• Cryophase™: Thermal cycling cryogenic treatment
Applications
• 82° - commonly found on oval countersunk head machine screws, flat head tapping screws, oval trim head tapping screws, socket flat head cap screws and countersunk head plow bolts
• 90° - Commonly found on oval head rivets and flat head countersunk rivets
• 100° - Commonly found on flat head blind rivets, self-plugging rivets, flush head drive pin rivets, close tolerance flat countersunk head machine screws, and flat head tapping screws
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together
Chatterless Countersink 82° Single Flute 1/2"
Couldn't load pickup availability
Cryocut 3/8" Body Dia. 82o Angle Countersink, 3-Flute
Couldn't load pickup availability
Chatterless Countersink 82° Single Flute 3/8"
Couldn't load pickup availability
Countersink 82° Single Flute 1-1/8"
Couldn't load pickup availability
Chatterless Countersink 82° Single Flute 3/16"
Couldn't load pickup availability
Cryocut 1/8" Body Dia. 90o Angle Countersink, 1-Flute
Couldn't load pickup availability
Heavy Duty Extra Length Drill Bit HSS 3/8"
Couldn't load pickup availability
Reciprocating Saw Blade 6" 18TPI
Couldn't load pickup availability
Spot Weld Remover Drill Bit Cobalt 1/4" (M6.5)
Couldn't load pickup availability
Molding Clip with Sealer Nylon White 11.5 x 21
Couldn't load pickup availability
Front/Rear Bumper Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Bumper Drive Rivet Plastic 10mm Hole
Couldn't load pickup availability
3Pc Multi-Purpose Scraper/Pry Bar Set
Couldn't load pickup availability
Curved Wood Handle Scratch Brush
Couldn't load pickup availability
Cryobit 1/4" Dia. Maintenance Drill Bit , 135o Split Point, W/ Flats
Couldn't load pickup availability
Product Description
• Three-flute center reamers cut countersinks and recesses for extisting holes• Cryophase™ treatment extends the wear resistance and useful life of these high speed steel countersinks
• 82°, 90° and 100° angles cover countersink requirements for most common fastener head styles
Specifications
• Material: High Speed Steel
• Hardness: 64-66Rc
• Cryophase™: Thermal cycling cryogenic treatment
Applications
• 82° - commonly found on oval countersunk head machine screws, flat head tapping screws, oval trim head tapping screws, socket flat head cap screws and countersunk head plow bolts
• 90° - Commonly found on oval head rivets and flat head countersunk rivets
• 100° - Commonly found on flat head blind rivets, self-plugging rivets, flush head drive pin rivets, close tolerance flat countersunk head machine screws, and flat head tapping screws
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | DY80850116 |
|---|---|
| Type | Countersink |
| Body Diameter | 1 " |
| Flutes | Three |
| Included Angle | 82 ° |
| Shank Size | 1/2 " |
| Shank Length | 1-1/4 " |
| Overall Length | 2-3/4 " |
| For Screw Size | No. 12 - 1/2 " |
| Centerline Angle | 41 ° |
| UNSPSC #: | 23241603 |
| TAA Compliant: | No |
| Weight: | 0.28 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
