DOT Air Brake Compression Sleeve for Nylon Tubing, Brass, 1/4"
(Pack of
10)
SKU:84321 Item#: 84321
• Fittings are shipped with nuts, sleeves and inserts preassembled, ready to slip onto tubing
• Meets D.O.T. FMVSS 571.106
• Temperature range: –40°F to +200°F (–40°C to +93°C)
• Exceeds pressure requirements of automotive air brake systems
• Typical applications include air brake systems, air control and gauge lines
• Used with nylon tubing (SAE J844, Type 3)
Assembly Instructions
1. Cut tubing squarely.
2. Insert tubing into fitting until bottomed on seat.
3. Tighten nut with wrench until one thread remains visible on the fitting body; or, the nut should be screwed down finger-tight, then wrench-tightened as indicated in the table (this will allow for a number of remakes).
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Frequently Bought Together
Air Brake Tank Filler Valve Brass 1/4-18
$0.00
Couldn't load pickup availability
Parker DOT Compression - Nylon Bulkhead Union 5/8x5/8
$0.00
Couldn't load pickup availability
DOT Compression Insert Male Brass 1/2 x 3/8"
$0.00
Couldn't load pickup availability
DOT Elbow Male Nylon 1/4 x 1/4-18
$0.00
Couldn't load pickup availability
DOT Branch Tee Male Brass 1/4 x 1/4 x 1/8-27
$0.00
Couldn't load pickup availability
DOT Elbow Male 45° Brass 1/4 x 1/4-18
$0.00
Couldn't load pickup availability
DOT Elbow Male 90° Brass 5/8 x 1/2-14
$0.00
Couldn't load pickup availability
DOT Union Brass 3/8 x 3/8"
$0.00
Couldn't load pickup availability
DOT Compression Elbow Male 90° Brass 3/8 x 1/4"
$0.00
Couldn't load pickup availability
All-Plastic Ergonomic Venturi Blow Gun
$0.00
Couldn't load pickup availability
Pipe Bushing Brass 3/8-18 x 1/4-18
$0.00
Couldn't load pickup availability
Pipe Bushing Brass 1/2-14 x 3/8-18
$0.00
Couldn't load pickup availability
Air Distributor Defroster Push-Type Retainer
$0.00
Couldn't load pickup availability
Fender Liner Screw Grommet Nylon M5.5
$0.00
Couldn't load pickup availability
Molding Clip with Sealer Nylon White 10 x 12mm
$0.00
Couldn't load pickup availability
Product Description
• Fittings are shipped with nuts, sleeves and inserts preassembled, ready to slip onto tubing• Meets D.O.T. FMVSS 571.106
• Temperature range: –40°F to +200°F (–40°C to +93°C)
• Exceeds pressure requirements of automotive air brake systems
• Typical applications include air brake systems, air control and gauge lines
• Used with nylon tubing (SAE J844, Type 3)
Assembly Instructions
1. Cut tubing squarely.
2. Insert tubing into fitting until bottomed on seat.
3. Tighten nut with wrench until one thread remains visible on the fitting body; or, the nut should be screwed down finger-tight, then wrench-tightened as indicated in the table (this will allow for a number of remakes).
Technical Specifications
| Item#: | 84321 |
|---|---|
| Fitting Type | Compression - Nylon |
| Style | DOT |
| Material | Brass |
| Configuration | Compression Sleeve |
| Connection Type A | Tube |
| Fitting Dimension A | 1/4 " |
| Fitting Dimension B | 1/4 " |
| Size | 1/4 |
| Type | Compression |
| UNSPSC #: | 25171700 |
| TAA Compliant: | No |
| Weight: | 0.02 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
