Drive Anchor For Concrete, Alloy Steel, Zinc Finish 1/4" x 1-1/2"
(Pack of
25)
SKU:64551 Item#: 64551
• Made of high-strength heat-treated alloy steel with zinc plating
• Flat head style
• Works best when countersunk
• Same size hole diameter as anchor diameter
• Dead loads only
• Meets GSA Specification FF-325C, Group VI
1. Using 1/4" carbide bit, drill hole at least 1/4" deeper than anchor embedment. Clean hole of debris.
2. To set, drive anchor into hole through item to be fastened.
Frequently Bought Together
Product Description
• Made of high-strength heat-treated alloy steel with zinc plating• Flat head style
• Works best when countersunk
• Same size hole diameter as anchor diameter
• Dead loads only
• Meets GSA Specification FF-325C, Group VI
1. Using 1/4" carbide bit, drill hole at least 1/4" deeper than anchor embedment. Clean hole of debris.
2. To set, drive anchor into hole through item to be fastened.
Technical Specifications
| Item#: | 64551 |
|---|---|
| Diameter | 1/4 " |
| Length | 1-1/2 " |
| Hole Diameter | 1/4 " |
| Type | Drive Anchor |
| Minimum Embedment | 1-1/8 " |
| Material | Steel |
| Ultimate Load In 3,000 PSI Concrerte | 2,010 lb |
| Finish | Zinc |
| UNSPSC #: | 31162101 |
| TAA Compliant: | Yes |
| Weight: | 0.59 lb |
