Hand Operated Bearing Packer
(Pack of
1.0)
The hand operated bearing packer simplifies grease replacement by removing old grease and replacing it with fresh grease with a simple hand press mechanism. This lightweight and portable packer removes the need for any grease gun or pump to grease a bearing.
This bearing packer is designed for bearings with diameters between 1 3/4" (45mm) to 3 1/2" (90mm), often used for greasing bearings in cars, boats, tractors, and RVs.
• Place the bearing on the piston.
• Pressing cap with the hand forces old grease out and makes way for new grease to flow in.
• Cap protects grease from contaminants when not in use.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together
DOT Compression Connector Male Brass 3/8 x 1/2"
Couldn't load pickup availability
DOT Compression Sleeve Brass 3/8"
Couldn't load pickup availability
DOT Compression Sleeve Brass 3/8"
Couldn't load pickup availability
Parker DOT Compression - Nylon Male Connector 3/8x1/8
Couldn't load pickup availability
Parker DOT Compression - Nylon Male Elbow 90 Degrees 5/8x3/8
Couldn't load pickup availability
DOT Compression Connector Male Brass 1/2 x 1/2"
Couldn't load pickup availability
Tough-Tek Rubber Pressure Washing Hose 1/4" X 50'
Couldn't load pickup availability
Pro Rubber Jack Hammer Air Hose Assembly 3/4" x 100'
Couldn't load pickup availability
Avagard Rubber Water Hose Assembly 5/8" x 25'
Couldn't load pickup availability
Ball Check Grease Fitting Drive Straight
Couldn't load pickup availability
Grease Fitting Cap Black
Couldn't load pickup availability
Ball Check Grease Fitting Straight
Couldn't load pickup availability
Bumper Drive Rivet Plastic 10mm Hole
Couldn't load pickup availability
Fender Splash Shield Push Rivet Nylon 7mm Hole
Couldn't load pickup availability
Weatherstrip Retainer Nylon 5 x 15mm
Couldn't load pickup availability
Product Description
The hand operated bearing packer simplifies grease replacement by removing old grease and replacing it with fresh grease with a simple hand press mechanism. This lightweight and portable packer removes the need for any grease gun or pump to grease a bearing.This bearing packer is designed for bearings with diameters between 1 3/4" (45mm) to 3 1/2" (90mm), often used for greasing bearings in cars, boats, tractors, and RVs.
• Place the bearing on the piston.
• Pressing cap with the hand forces old grease out and makes way for new grease to flow in.
• Cap protects grease from contaminants when not in use.
Technical Specifications
| Item#: | 1677926 |
|---|---|
| Group | Bearing Packer |
| Style | Manual Bearing Packer |
| UNSPSC #: | 27112900 |
| TAA Compliant: | No |
| Weight: | 1.14 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
