Spiral Point Hand Tap, High Speed Steel, 2 Flute, 1/4-20, 5/8" Thread Length
(Pack of
1)
SKU:61126 Item#: 61126
• Spiral point design has a left hand flute at the point to provide a positive rake and drive the chip ahead of the tap
• Shorter overall thread length minimizes drag after the first full thread
• Reduced neck provides clearance to prevent breakage and allows room for lubrication to reach cutting edge
• Precision-ground thread design performs better in controlled machine set-ups and tougher off-hand maintenance applications
• Three flutes stabilize starting direction to facilitate tapping straight holes
• Manufactured from high-speed steel
• Recommended for through holes in most materials
• Designed for tapping on machining centers
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Fire and Rescue Reciprocating Blade 6"
$0.00
Couldn't load pickup availability
Scotch-Brite Roloc Bristle Disc 2"
$0.00
Couldn't load pickup availability
Reinforced Mini Cut-Off Wheel 3"
$0.00
Couldn't load pickup availability
Bumper Fascia Push-Type Retainer Nylon 18mm
$0.00
Couldn't load pickup availability
Fender Splash Shield Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Push-Type Retainer Nylon 15mm
$0.00
Couldn't load pickup availability
HSS Spiral Point Hand Tap M4 x 0.7
$0.00
Couldn't load pickup availability
HSS Spiral Point Hand Tap 7/8-9
$0.00
Couldn't load pickup availability
Pilotdrive Cryotap 1/2"-20 Starter Hand Tap
$0.00
Couldn't load pickup availability
Cryotap M7 x 1.0 Metric Plug Hand Tap
$0.00
Couldn't load pickup availability
Pilotdrive Cryotap M10 x 1.5 Metric Tri-Pak, Taper, Plug, Bottoming
$0.00
Couldn't load pickup availability
Cryotap #10-24 Tri-Pak
$0.00
Couldn't load pickup availability
10Pc SAE Mini Combination Wrench Set
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit Cobalt 5/16" (M8)
$0.00
Couldn't load pickup availability
1/8" - 1/2 " Cryonitride Spiral Fluted Step Drill - 1/4" Shank
$0.00
Couldn't load pickup availability
Product Description
• Spiral point design has a left hand flute at the point to provide a positive rake and drive the chip ahead of the tap• Shorter overall thread length minimizes drag after the first full thread
• Reduced neck provides clearance to prevent breakage and allows room for lubrication to reach cutting edge
• Precision-ground thread design performs better in controlled machine set-ups and tougher off-hand maintenance applications
• Three flutes stabilize starting direction to facilitate tapping straight holes
• Manufactured from high-speed steel
• Recommended for through holes in most materials
• Designed for tapping on machining centers
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 61126 |
|---|---|
| Type | Fractional |
| Diameter | 1/4 " |
| Pitch | 20 |
| Flutes | 2 |
| Thread Length | 5/8 " |
| H Limits | GH3 |
| Material | HSS |
| Recommended Drill Size | No. 7 |
| UNSPSC #: | 23241615 |
| TAA Compliant: | Yes |
| Weight: | 0.04 lb |
