Spiral Point Hand Tap, High Speed Steel, 2 Flute, 12-24, 1/2" Thread Length
(Pack of
1)
SKU:61122 Item#: 61122
• Spiral point design has a left hand flute at the point to provide a positive rake and drive the chip ahead of the tap
• Shorter overall thread length minimizes drag after the first full thread
• Reduced neck provides clearance to prevent breakage and allows room for lubrication to reach cutting edge
• Precision-ground thread design performs better in controlled machine set-ups and tougher off-hand maintenance applications
• Three flutes stabilize starting direction to facilitate tapping straight holes
• Manufactured from high-speed steel
• Recommended for through holes in most materials
• Designed for tapping on machining centers
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
1/4" - 3/4" Cryonitride Spiral Fluted Step Drill - 3/8" Shank
$0.00
Couldn't load pickup availability
Mini-Hole Saw Kit
$0.00
Couldn't load pickup availability
Jobber Length Drill Bit HSS 6.5mm
$0.00
Couldn't load pickup availability
Specialty Rivet with Plastic Cap Aluminum 3.2mm
$0.00
Couldn't load pickup availability
Inner Fender Shield Attaching Clip Nylon Black
$0.00
Couldn't load pickup availability
Front Fender Liner Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
HSS Spiral Point Hand Tap M16 x 2
$0.00
Couldn't load pickup availability
Pilotdrive Cryotap 1/4"-28 Starter Hand Tap
$0.00
Couldn't load pickup availability
HSS Spiral Point Hand Tap M12 x 1.75
$0.00
Couldn't load pickup availability
Cryo-Drap #10-24 Drill & Tap Combo, 135o Split Point, W/Flats
$0.00
Couldn't load pickup availability
Carbon Steel Replacement Hand Tap 1/2-13
$0.00
Couldn't load pickup availability
4-Flute HSS Taper Hand Tap 1-8
$0.00
Couldn't load pickup availability
12" Auto-Adjust Pliers
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit Cobalt 5/16" (M8)
$0.00
Couldn't load pickup availability
2.1 Round Head Ratchet 1/4 Drive 168 Tooth
$0.00
Couldn't load pickup availability
Product Description
• Spiral point design has a left hand flute at the point to provide a positive rake and drive the chip ahead of the tap• Shorter overall thread length minimizes drag after the first full thread
• Reduced neck provides clearance to prevent breakage and allows room for lubrication to reach cutting edge
• Precision-ground thread design performs better in controlled machine set-ups and tougher off-hand maintenance applications
• Three flutes stabilize starting direction to facilitate tapping straight holes
• Manufactured from high-speed steel
• Recommended for through holes in most materials
• Designed for tapping on machining centers
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 61122 |
|---|---|
| Type | Machine Screw |
| Diameter | #12 |
| Pitch | 24 |
| Flutes | 2 |
| Thread Length | 1/2 " |
| H Limits | GH3 |
| Material | HSS |
| Recommended Drill Size | No. 17 |
| UNSPSC #: | 23241615 |
| TAA Compliant: | Yes |
| Weight: | 0.025 lb |
