Pilotdrive Cryotap 1"-8 Starter Hand Tap
(Pack of 1)

CryoTool®

• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.

Check Availability

Quantity

California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov

Frequently Bought Together

Spot Weld Remover Drill Bit

Spot Weld Remover Drill Bit Cobalt 3/8" (M10)

Spot Weld Remover Drill Bit Kit 11Pcs

Adhesive-Back Shim Stock 5/16 x 1" x 30'

9178NFO Cut Resistant Gloves

Adhesive-Back Shim Stock 5/32 x 3/8" x 30'

Hex Head Sheet Metal Screw with 16mm Washer Steel

Front/Rear Bumper Push-Type Retainer Nylon 20mm

Bumper Drive Rivet Plastic 10mm Hole

HSS Spiral Point Hand Tap 1/2-20

HSS Spiral Point Hand Tap 5/16-24

Pilotdrive Cryotap #6-32 Starter Hand Tap

Item#: DY80635002

HSS Combination Drill-Tap M10

4-Flute HSS Plug Hand Tap M8 x 1

Carbon Steel Replacement Hand Tap 9/16-18

9" Hi-Level Heavy-Duty Power Jaw Plier-Cutter

Item#: DY89310354

Twist-On Abrasive Disc 2"

Zirconium Grain Locking Grinding Disc 2"

Product Description

• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.

Technical Specifications

Item#:	DY80635029
Type	Fractional
Diameter	1 "
Pitch	8
Flutes	4
Thread Length	2-1/2 "
H Limits	H4
Overall Length	5-1/8 "
Recommended Drill Size	7/8 "
UNSPSC #:	23241615
TAA Compliant:	No
Weight:	0.63 lb

Product Restrictions

California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov

Suggested Products

Spot Weld Remover Drill Bit HSS 2-13/16(M8)

Sheet Metal Drill Bit Alloy Steel 1/8"

Spot Weld Remover Drill Bit HSS 1/4" (M6)

Spot Weld Remover Drill Bit HSS 3/8" (M10)

Abrasive Hand Pad All Purpose 6 x 9"

Sheet Metal Drill Bit Alloy Steel 1/4"

Twist-On Abrasive Disc 2"

Sheet Metal Drill Bit Alloy Steel 3/16"

Spot Weld Remover Drill Bit Cobalt 5/16" (M8)

Scotch-Brite Roloc Bristle Disc 2"

Scotch-Brite Roloc Bristle Disc 2"

Aluminum Oxide Grain Locking Grinding Disc 2"

Your Recently Viewed Items