Large Diameter Tapcon® Anchor 3/8 x 3"
(Pack of
10.0)
• High performance, high production, self-threading anchor
• Carbon steel with zinc plating
• Removable
• Low slippage
• High shear strength
• Finished head
• Vibration-resistant
• Ideal for stadium seating, racking, shelving and conveyors
1. Using the correct diameter carbide tipped bit, drill a pilot hole at least 1/4" deeper than anchor embedment.
2. Using a 1/2" impact wrench, drive anchor until fully seated.
Length Identification Code is located on the anchor head for easy identification and inspection
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together
Drill 'N Drive Masonry Anchor Assortment 283Pcs
Couldn't load pickup availability
Standard Self-Drilling Wallboard Anchor Kit 41Pcs
Couldn't load pickup availability
Masonry Anchor Assortment 700Pcs
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M10-1.25 x 30mm
Couldn't load pickup availability
Open End Rivet Dome Head Aluminum 3/16"
Couldn't load pickup availability
Open End Rivet Dome Head Aluminum 3/16"
Couldn't load pickup availability
Masonry Anchor Star Head Steel 1/4 x 1-3/4"
Couldn't load pickup availability
Masonry Anchor TORX® Head Steel 1/4 x 6"
Couldn't load pickup availability
Masonry Anchor TORX®Head Steel 1/4 x 5"
Couldn't load pickup availability
High-Tech Seam Sealer Clear 5fl.oz
Couldn't load pickup availability
Engine Under Cover Drive Rivet Plastic 7mm Hole
Couldn't load pickup availability
Bumper Fascia General Purpose Split Rivet 3/16"
Couldn't load pickup availability
Product Description
• High performance, high production, self-threading anchor• Carbon steel with zinc plating
• Removable
• Low slippage
• High shear strength
• Finished head
• Vibration-resistant
• Ideal for stadium seating, racking, shelving and conveyors
1. Using the correct diameter carbide tipped bit, drill a pilot hole at least 1/4" deeper than anchor embedment.
2. Using a 1/2" impact wrench, drive anchor until fully seated.
Length Identification Code is located on the anchor head for easy identification and inspection
Technical Specifications
| Item#: | 61667 |
|---|---|
| Diameter | 3/8 " |
| Length | 3 " |
| Type | Screw Anchor |
| Drill Size | 5/16 " |
| UNSPSC #: | 31162104 |
| TAA Compliant: | Yes |
| Weight: | 0.88 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
