Masonry Anchor, TORX®Flat Head, Steel, Stalgard Coated, 1/4 x 5"
(Pack of
50)
UltraCon+® Anchors and Drill Bits
Fast installation drill hole, drive anchor
Anchors available in three head styles: Slotted hex washer head for most applications; TORX® head provides flush seating for countersunk applications; 5/16" hex washer head has an oversized (0.540") washer face
Replaces expansion anchors, plugs and screws
Hi-Lo threads provide exceptional holding strength with no spalling
Notched cutting edges for easy installation cuts threads into poured concrete, brick or hollow block
Gimlet point for self drilling into wood base material
Reversible and removable
Stalgard®-coated for superior corrosion resistance withstands a minimum of 800 hours of neutral salt-spray testing without evidence of red rust on significant surfaces
Carbide-Tipped UltraCon® Masonry Hammer Drill Bits are required these bits are special size and tolerance products; use of any other bit will cause inconsistent performance of the anchor (sold separately)
1/4" dia. UltraCon® Anchors have a blue Stalgard® finish.
UltraCon® and Stalgard® are registered trademarks of Acument Intellectual Properties, LLC.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together

Masonry Anchor Phillips Head #14-10 x 2-1/4"
Couldn't load pickup availability

Lag Screw Shield Anchor Long Style 3/8 x 2-1/2"
Couldn't load pickup availability

Double Expansion Shield Anchor Alloy Steel 5/8"
Couldn't load pickup availability

Lockbolt Collar Standard Flange Aluminum 3/16"
Couldn't load pickup availability

Serrated Hex Flange Nut Alloy Steel M10-1.25
Couldn't load pickup availability

Open End Rivet Dome Head Aluminum 5/32"
Couldn't load pickup availability

Masonry Anchor Hex Washer Head Steel 3/16 x 2-3/4"
Couldn't load pickup availability

Masonry Anchor Star Head Steel 1/4 x 3-3/4"
Couldn't load pickup availability

Large Diameter Tapcon® Anchor 3/8 x 2-1/2"
Couldn't load pickup availability

Molding Clip with Sealer Nylon White 11.5 x 21
Couldn't load pickup availability

Fender Splash Shield Push Rivet Nylon 7mm Hole
Couldn't load pickup availability

Nylon Cable Tie 7-1/2" Black
Couldn't load pickup availability
Product Description
UltraCon+® Anchors and Drill Bits Fast installation drill hole, drive anchor
Anchors available in three head styles: Slotted hex washer head for most applications; TORX® head provides flush seating for countersunk applications; 5/16" hex washer head has an oversized (0.540") washer face
Replaces expansion anchors, plugs and screws
Hi-Lo threads provide exceptional holding strength with no spalling
Notched cutting edges for easy installation cuts threads into poured concrete, brick or hollow block
Gimlet point for self drilling into wood base material
Reversible and removable
Stalgard®-coated for superior corrosion resistance withstands a minimum of 800 hours of neutral salt-spray testing without evidence of red rust on significant surfaces
Carbide-Tipped UltraCon® Masonry Hammer Drill Bits are required these bits are special size and tolerance products; use of any other bit will cause inconsistent performance of the anchor (sold separately)
1/4" dia. UltraCon® Anchors have a blue Stalgard® finish.
UltraCon® and Stalgard® are registered trademarks of Acument Intellectual Properties, LLC.
Technical Specifications
Item#: | 60756 |
---|---|
Diameter | 1/4 " |
Length | 5 " |
Type | Screw Anchor |
Material | Carbon Steel |
Finish | Stalgard-Coated |
For Material Thickness | 3-1/2 - 4 " |
Drive | TORX® |
Drive Size | T25 |
Drill Size | 3/16 " |
Head Style | Flat |
Drive Style | TORX® |
UNSPSC #: | 31162104 |
TAA Compliant: | Yes |
Weight: | 2.13 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov


