Pilotdrive Cryotap 1/2"-20 Starter Hand Tap
(Pack of 1)

CryoTool®

• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.

Check Availability

Quantity

California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov

Frequently Bought Together

Scotch-Brite Roloc Bristle Disc 2"

Aluminum Oxide Grain Locking Grinding Disc 2"

Reinforced Mini Cut-Off Wheel 3"

Item#: 93483M12

Round Mini Turbo Mixer with Integrated Nut

34 Oz Manual Sprayer

18" Locking Smooth Operator Clamp

Item#: DY89840518

Drive Rivet Nylon M8

Specialty Rivet with Plastic Cap Aluminum 3.2mm

Inner Fender Shield Attaching Clip Nylon Black

Pilotdrive Cryotap M7 x 1.0 Starter Hand Tap

Item#: DY80636016

HSS Spiral Point Hand Tap M16 x 2

Pilotdrive Cryotap 1/4"-28 Starter Hand Tap

Item#: DY80635010

3-Flute HSS Taper Hand Tap M2.5 x 0.45

4-Flute HSS Taper Hand Tap M12 x 1.5

Carbon Steel Replacement Hand Tap 5/16-18

Interchangeable Hex Bit Set 24Pc SAE

Item#: DY89310520

Twist-On Abrasive Disc 2"

Master Security Bit Set 203Pc

Item#: DY81100900

Product Description

• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.

Technical Specifications

Item#:	DY80635018
Type	Fractional
Diameter	1/2 "
Pitch	20
Flutes	4
Thread Length	15/16 "
H Limits	H3
Overall Length	3-3/8 "
Recommended Drill Size	29/64 "
UNSPSC #:	23241615
TAA Compliant:	No
Weight:	0.095 lb

Product Restrictions

California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov

Suggested Products

Spot Weld Remover Drill Bit HSS 2-13/16(M8)

Sheet Metal Drill Bit Alloy Steel 1/8"

Spot Weld Remover Drill Bit HSS 1/4" (M6)

Spot Weld Remover Drill Bit HSS 3/8" (M10)

Abrasive Hand Pad All Purpose 6 x 9"

Twist-On Abrasive Disc 2"

Sheet Metal Drill Bit Alloy Steel 1/4"

Sheet Metal Drill Bit Alloy Steel 3/16"

Scotch-Brite Roloc Bristle Disc 2"

Spot Weld Remover Drill Bit Cobalt 5/16" (M8)

Scotch-Brite Roloc Bristle Disc 2"

Aluminum Oxide Grain Locking Grinding Disc 2"

Your Recently Viewed Items