Pilotdrive Cryotap M5 x 0.8 Starter Hand Tap
(Pack of
1)
SKU:DY80636012 Item#: DY80636012
• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov
Frequently Bought Together
Twist-On Abrasive Disc 2"
$0.00
Couldn't load pickup availability
Reinforced Mini Cut-Off Wheel 3"
$0.00
Couldn't load pickup availability
General Purpose Jobber Length Drill Bit HSS 4.2mm
$0.00
Couldn't load pickup availability
8Pc Metric Flare Nut Wrench Set
$0.00
Couldn't load pickup availability
Universal Socket Set, Deep, 1/2" Drive, 24pc
$0.00
Couldn't load pickup availability
Quick Seal 2000 Sprayable Seam Sealer Beige
$0.00
Couldn't load pickup availability
Bumper Fascia Push-Type Retainer Nylon 18mm
$0.00
Couldn't load pickup availability
Wheel Opening Drive Rivet Aluminum 5/32"
$0.00
Couldn't load pickup availability
Push-Type Retainer Nylon 15mm
$0.00
Couldn't load pickup availability
HSS Spiral Point Hand Tap 7/16-20
$0.00
Couldn't load pickup availability
HSS Spiral Point Hand Tap 1/4-28
$0.00
Couldn't load pickup availability
HSS Spiral Point Hand Tap M4 x 0.7
$0.00
Couldn't load pickup availability
Cryotap 1/2"-13 Tri-Pak
$0.00
Couldn't load pickup availability
Cryotap M10 x 1.5 Metric Taper Hand Tap
$0.00
Couldn't load pickup availability
Cryotap M7 x 1.0 Metric Plug Hand Tap
$0.00
Couldn't load pickup availability
2.1 Round Head Ratchet 3/8 Drive 168 Tooth
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit Cobalt 5/16" (M8)
$0.00
Couldn't load pickup availability
8" Dual Jaw Adj and Pipe Wrench
$0.00
Couldn't load pickup availability
Product Description
• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | DY80636012 |
|---|---|
| Type | Metric |
| Diameter | M5 |
| Pitch | 0.8 mm |
| Flutes | 4 |
| Overall Length | 2-3/8 " |
| Recommended Drill Size | 4.2 mm |
| UNSPSC #: | 23241615 |
| TAA Compliant: | No |
| Weight: | 0.02 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov
