Pilotdrive Cryotap #10-24 Tri-Pak, Pilotdrive, Plug, Bottoming Hand Taps
(Pack of
1)
SKU:DY80691004 Item#: DY80691004
• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Treatment: Cryophase™ thermal cycle process
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
1/4" - 3/4" Cryonitride Spiral Fluted Step Drill - 3/8" Shank
$0.00
Couldn't load pickup availability
Mini-Hole Saw Kit
$0.00
Couldn't load pickup availability
Jobber Length Drill Bit HSS 6.5mm
$0.00
Couldn't load pickup availability
4-Flute HSS Taper Hand Tap M12 x 1.5
$0.00
Couldn't load pickup availability
Carbon Steel Replacement Hand Tap 5/16-18
$0.00
Couldn't load pickup availability
Carbon Steel Replacement Hand Tap M16 x 1.5
$0.00
Couldn't load pickup availability
Specialty Rivet with Plastic Cap Aluminum 3.2mm
$0.00
Couldn't load pickup availability
Inner Fender Shield Attaching Clip Nylon Black
$0.00
Couldn't load pickup availability
Front Fender Liner Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Cryo-Drap #10-24 Drill & Tap Combo, 135o Split Point, W/Flats
$0.00
Couldn't load pickup availability
Carbon Steel Replacement Hand Tap 1/2-13
$0.00
Couldn't load pickup availability
4-Flute HSS Taper Hand Tap 1-8
$0.00
Couldn't load pickup availability
12" Auto-Adjust Pliers
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit Cobalt 5/16" (M8)
$0.00
Couldn't load pickup availability
2.1 Round Head Ratchet 1/4 Drive 168 Tooth
$0.00
Couldn't load pickup availability
Product Description
• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Treatment: Cryophase™ thermal cycle process
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | DY80691004 |
|---|---|
| Type | Machine Screw |
| Style | Set |
| Material | CM-8™ Tool Steel |
| Diameter | #10 |
| Pitch | 24 |
| Flutes | 4 |
| Thread Length | 2-3/8 " |
| H Limits | 4 |
| Recommended Drill Size | No. 25 |
| Description | One each of Pilotdrive, Plug, and Bottoming Style Taps |
| UNSPSC #: | 23241615 |
| TAA Compliant: | No |
| Weight: | 0.07 lb |
