Pilotdrive Cryotap 7/8"-9 Tri-Pak, Pilotdrive, Plug, Bottoming Hand Taps
(Pack of
1)
SKU:DY80694903 Item#: DY80694903
• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Treatment: Cryophase™ thermal cycle process
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Spot Weld Remover Drill Bit Cobalt 5/16" (M8)
$0.00
Couldn't load pickup availability
Double Flute Step Drill Bit 3/16 to 7/8"
$0.00
Couldn't load pickup availability
Air Saw Blade 4" 32TPI
$0.00
Couldn't load pickup availability
HSS Left Hand Plug Tap 3/8-24
$0.00
Couldn't load pickup availability
4-Flute HSS Plug Hand Tap M8 x 1
$0.00
Couldn't load pickup availability
Carbon Steel Replacement Hand Tap 9/16-18
$0.00
Couldn't load pickup availability
Front Bumper Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Front Bumper and Radiator Support Drive Rivet
$0.00
Couldn't load pickup availability
Metric Indented Hex Head Bolt with 17mm Washer
$0.00
Couldn't load pickup availability
3-Flute HSS Taper Hand Tap 3-48
$0.00
Couldn't load pickup availability
2-Flute HSS Taper Hand Tap M1.6 x 0.35
$0.00
Couldn't load pickup availability
Carbon Steel Replacement Hand Tap M14 x 2
$0.00
Couldn't load pickup availability
Spinning Handmaster Driver Set 5Pc Set
$0.00
Couldn't load pickup availability
Universal Socket Set, Metric, 3/8" Drive, 12pc
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 2-1/4" (M6)
$0.00
Couldn't load pickup availability
Product Description
• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Treatment: Cryophase™ thermal cycle process
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | DY80694903 |
|---|---|
| Type | Fractional |
| Style | Set |
| Material | High Speed Steel |
| Diameter | 7/8 " |
| Pitch | 9 |
| Flutes | 4 |
| Thread Length | 4-3/4 " |
| H Limits | 4 |
| Recommended Drill Size | 49/64 " |
| Description | One each of Pilotdrive, Plug, and Bottoming Style Taps |
| UNSPSC #: | 23241615 |
| TAA Compliant: | No |
| Weight: | 1.395 lb |
