Pilotdrive Cryotap #8-32 Starter Hand Tap
(Pack of
1)
SKU:DY80635004 Item#: DY80635004
• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov
Frequently Bought Together
Steel Crimped End Brush 1/2"
$0.00
Couldn't load pickup availability
General Purpose Jobber Length Drill Bit HSS 4.8mm
$0.00
Couldn't load pickup availability
Small General Purpose Bimetal Hole Saw Kit 9Pcs
$0.00
Couldn't load pickup availability
Ceramic Detail Spray - RTU
$0.00
Couldn't load pickup availability
Quick Seal 2000 Sprayable Seam Sealer Beige
$0.00
Couldn't load pickup availability
Adhesive-Back Shim Stock 5/16 x 1" x 30'
$0.00
Couldn't load pickup availability
Radiator Grille Nut M4.2-1.41
$0.00
Couldn't load pickup availability
Wheel Opening Drive Rivet Aluminum 5/32"
$0.00
Couldn't load pickup availability
Front Bumper Specialty Nut Steel M4.2-1.41
$0.00
Couldn't load pickup availability
HSS Spiral Point Hand Tap 12-28
$0.00
Couldn't load pickup availability
HSS Spiral Point Hand Tap 7/16-20
$0.00
Couldn't load pickup availability
HSS Spiral Point Hand Tap 1/4-28
$0.00
Couldn't load pickup availability
4-Flute HSS Hand Tap Kit M16 x 2
$0.00
Couldn't load pickup availability
Cryotap 1/2"-13 Tri-Pak
$0.00
Couldn't load pickup availability
Cryotap M10 x 1.5 Metric Taper Hand Tap
$0.00
Couldn't load pickup availability
57Pc Torsion Impact Bit Master Set
$0.00
Couldn't load pickup availability
8" Dual Jaw Adj and Pipe Wrench
$0.00
Couldn't load pickup availability
Razor Blade Single Edge w/Notch
$0.00
Couldn't load pickup availability
Product Description
• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | DY80635004 |
|---|---|
| Type | Machine Screw |
| Diameter | #8 |
| Pitch | 32 |
| Flutes | 4 |
| Thread Length | 3/8 " |
| H Limits | H3 |
| Overall Length | 2-1/8 " |
| Recommended Drill Size | No. 29 |
| UNSPSC #: | 23241615 |
| TAA Compliant: | No |
| Weight: | 0.015 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov
