Quick Connect Crimping Tool, 26-6 AWG, Heat-Treated Carbon Steel, Anvil-Type Wire Cutter, Circular Knife Edges, Cushioned Handles
(Pack of
1)
SKU:93474 Item#: 93474
• Made of high-strength, heat-treated carbon steel
• Crimps 8 to 6 Ga. insulated terminals and butt connectors, 26 to 6 Ga. non-insulated terminals and connectors, non-insulated flags, quick-slides and crimp sleeves, and high-temperature bare terminals
• Anvil-type wire cutter in nose
• Cut-off dies for mild steel and non-ferrous screws
• Wire-stripping stations with circular knife edges
• Textured, cushioned handles
Frequently Bought Together
Terminal Crimp Die 22-10 AWG
$0.00
Couldn't load pickup availability
Terminal Crimp Frame
$0.00
Couldn't load pickup availability
Crimping Tool 500 Series 8 AWG-500 MCM
$0.00
Couldn't load pickup availability
Hand Hydraulic Cable Crimper Set With Dies And Case
$0.00
Couldn't load pickup availability
Extra-Long Circuit Tester with Retractable Cord
$0.00
Couldn't load pickup availability
Terminal Crimping Tool with Die 22-10 AWG
$0.00
Couldn't load pickup availability
Spot Sanding Pen Glass Fiber Cartridge Refill
$0.00
Couldn't load pickup availability
Twist-On Holding Pad 20000rpm 3"
$0.00
Couldn't load pickup availability
Pneumatic Bristle Surface Preparation Tool 12"
$0.00
Couldn't load pickup availability
Wheel Opening Drive Rivet Aluminum 5/32"
$0.00
Couldn't load pickup availability
Front Bumper Specialty Nut Steel M4.2-1.41
$0.00
Couldn't load pickup availability
Push-Type Retainer Nylon 15mm
$0.00
Couldn't load pickup availability
8" Dual Jaw Adj and Pipe Wrench
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit Cobalt 5/16" (M8)
$0.00
Couldn't load pickup availability
10Pc SAE Mini Combination Wrench Set
$0.00
Couldn't load pickup availability
Product Description
• Made of high-strength, heat-treated carbon steel• Crimps 8 to 6 Ga. insulated terminals and butt connectors, 26 to 6 Ga. non-insulated terminals and connectors, non-insulated flags, quick-slides and crimp sleeves, and high-temperature bare terminals
• Anvil-type wire cutter in nose
• Cut-off dies for mild steel and non-ferrous screws
• Wire-stripping stations with circular knife edges
• Textured, cushioned handles
Technical Specifications
| Item#: | 93474 |
|---|---|
| Type | Crimping Tool |
| Style | Q.C. Crimping Tool |
| Crimp Range | 8 to 6 Ga. insulated terminals, 26 to 6 Ga. for non-insulated terminals |
| Description | Q.C. Crimping Tool |
| UNSPSC #: | 27111500 |
| TAA Compliant: | No |
| Weight: | 0.6 lb |
