SDS Plus Pointed Chisel 8" Overall Length
(Pack of 1.0)

Kent Automotive

Works like a lightweight jack hammer to cut bricks and demolish masonry and concrete
• Forged and heat treated chromium steel for toughness
• Cutting edge is 58Rc and can be resharpened
• Available in three types: Flat chisel, pointed chisel, and in a gouging chisel for opening cracks
• Fits air or electric SDS Plus hammer drills with non-rotating impact mode
Applications
• Breaking: Concrete, masonry bricks, and asphalt
• Chipping: Concrete off foundations, asphalt, and shaping stone
• Grooving: Concrete for repair or modification and asphalt for repair
• Removing: Spilled and hardened concrete, loose concrete for repair, and broken asphalt for repair
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.

Check Availability

Quantity

California Proposition 65: Not Applicable
www.P65Warnings.ca.gov

Frequently Bought Together

Twist-On Abrasive Disc 2"

Spot Weld Remover Drill Bit Kit 11Pcs

Spot Weld Remover Drill Bit 5/16" (M8)

No product placeholder

General Purpose Jobber Length Drill Bit HSS 4.8mm

Cryoboost Drill Bit, 1/4" Dia. W/Flats

Item#: DY83601664

Double End Drill Bit 5/32"

Zinc-Rich Weld-Through Primer

21 Compartment Small Drawer

DTM Primer Tan

3/8" Dia. Masonry Bit, SDS Plus Shank, 6" Overall Length

Item#: DY80442106

1/4" Dia. Masonry Bit, SDS Plus Shank, 14" Overall Length

Item#: DY80441314

3/16"X5" SDS Plus Hammer Drill Anchor Drive

Item#: DY80445905

Front Bumper Trim Panel/Running Board Split Rivet

Shield Push-Type Retainer with Metal Insert

Front Bumper Specialty Nut Steel M4.2-1.41

Sheet Metal Drill Bit Alloy Steel 3/16"

Scotch-Brite Roloc Bristle Disc 2"

Zirconium Grain Locking Grinding Disc 2"

Product Description

Works like a lightweight jack hammer to cut bricks and demolish masonry and concrete
• Forged and heat treated chromium steel for toughness
• Cutting edge is 58Rc and can be resharpened
• Available in three types: Flat chisel, pointed chisel, and in a gouging chisel for opening cracks
• Fits air or electric SDS Plus hammer drills with non-rotating impact mode
Applications
• Breaking: Concrete, masonry bricks, and asphalt
• Chipping: Concrete off foundations, asphalt, and shaping stone
• Grooving: Concrete for repair or modification and asphalt for repair
• Removing: Spilled and hardened concrete, loose concrete for repair, and broken asphalt for repair
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.

Technical Specifications

Item#:	PM08200568
Type	Pointed Chisel
Shank Type	SDS Plus
Overall Length	8 "
UNSPSC #:	27000000
TAA Compliant:	No
Weight:	0.38 lb

Product Restrictions

California Proposition 65: Not Applicable
www.P65Warnings.ca.gov

Suggested Products

Spot Weld Remover Drill Bit HSS 2-13/16(M8)

Sheet Metal Drill Bit Alloy Steel 1/8"

Spot Weld Remover Drill Bit HSS 1/4" (M6)

Abrasive Hand Pad All Purpose 6 x 9"

Spot Weld Remover Drill Bit HSS 3/8" (M10)

Twist-On Abrasive Disc 2"

Sheet Metal Drill Bit Alloy Steel 1/4"

Scotch-Brite Roloc Bristle Disc 2"

Aluminum Oxide Grain Locking Grinding Disc 2"

Sheet Metal Drill Bit Alloy Steel 3/16"

Scotch-Brite Roloc Bristle Disc 2"

Zirconium Grain Locking Grinding Disc 2"

Your Recently Viewed Items