SnapSkru® Mini Self-Drilling Wall Anchor, Nylon, #6 to #8 Screw Diameter, 1-1/4" Overall Length
(Pack of
25)
SKU:18284 Item#: 18284
• Anchor locks on wall; hear it “pop” and lock
• Shock- and vibration-resistant
• Installs with a screwdriver or screw gun; no pre-drilling necessary
• Positive stop resists over-turning
• Screw and fixture can be removed, leaving anchor in wall for reuse
• Remove and reinstall anchor in same hole
• For use in 3/8", 1/2" and 5/8" drywall applications
1. Press tip of SnapSkru™ anchor into drywall using a No. 2 Phillips screwdriver or screw gun. Drive anchor clockwise into drywall until anchor stops flush with wall.
2. Place item over anchor and insert screw.
3. Tighten screw flush with item. Screw “pops” open anchor, locking anchor to wall.
Frequently Bought Together
Masonry Anchor Assortment 243Pcs
$0.00
Couldn't load pickup availability
Light-Medium Duty Anchor Assortment 555Pcs
$0.00
Couldn't load pickup availability
Wallboard Anchor Assortment 1125Pcs
$0.00
Couldn't load pickup availability
DIN 125A Flat Washer Grade 140 HV M12
$0.00
Couldn't load pickup availability
Open End Rivet Dome Head Aluminum 1/8"
$0.00
Couldn't load pickup availability
Self-Drilling Screw Hex Head 1/4-14 x 1"
$0.00
Couldn't load pickup availability
Fender and Bumper Push-Type Retainer Nylon 18mm
$0.00
Couldn't load pickup availability
Hex Head Sheet Metal Screw with 16mm Washer Steel
$0.00
Couldn't load pickup availability
Air Distributor Defroster Push-Type Retainer
$0.00
Couldn't load pickup availability
Tamper-Proof Nail Drive Anchor Steel 1/4 x 1-1/2"
$0.00
Couldn't load pickup availability
ALLIGATOR® Anchor Nylon #6 to #10
$0.00
Couldn't load pickup availability
Arrow Point Drywall Anchor Steel #10
$0.00
Couldn't load pickup availability
Product Description
• Anchor locks on wall; hear it “pop” and lock• Shock- and vibration-resistant
• Installs with a screwdriver or screw gun; no pre-drilling necessary
• Positive stop resists over-turning
• Screw and fixture can be removed, leaving anchor in wall for reuse
• Remove and reinstall anchor in same hole
• For use in 3/8", 1/2" and 5/8" drywall applications
1. Press tip of SnapSkru™ anchor into drywall using a No. 2 Phillips screwdriver or screw gun. Drive anchor clockwise into drywall until anchor stops flush with wall.
2. Place item over anchor and insert screw.
3. Tighten screw flush with item. Screw “pops” open anchor, locking anchor to wall.
Technical Specifications
| Item#: | 18284 |
|---|---|
| Length | 1 1/4 " |
| Type | Wall Anchor |
| Diameter | 2/5 " |
| Material | Nylon |
| Screw Diameter | No. 6 - No. 8 |
| Recommended Screw Length | Item Thickness + 1" |
| Screw Size | No. 6 - No. 8 " |
| Flange Diameter | 0.4 " |
| UNSPSC #: | 31162103 |
| TAA Compliant: | Yes |
| Weight: | 0.07 lb |
