Solid Drill Bit, Carbide, Titanium Carbonitride Finish, 135° Point, 2" Flute Length, 1/2 x 3-1/2"
(Pack of
1)
SKU:P58056 Item#: P58056
• Modified relief angles on a 135° point penetrate the workpiece easier while maintaining a durable outside cutting edge
• Titanium CarboNitride (TiCN) coating improves heat resistance and reduces wear to the cutting edges; outperforms Titanium Nitride (TiN) coatings
• Three-flute design removes chips effectively
• No cutting fluids are needed for Cobra™ Drill Bits
• Three flats are ground on the shanks (size 1/4" and greater) to reduce the chances of slippage and breaking
• For use on heat-treated, hardened material up to Rc 65
• Recommended for drill press operation only
NOTE: Cobra™ Drill Bits should be run at higher speeds than standard high-speed steel twist drills. It is also recommended that a woodpeckering technique be used to prevent chips from clogging in the flutes.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov
Frequently Bought Together
Cryo Armor Cut 27/64" Dia. Drill Bit, Carbide 118o Point
$0.00
Couldn't load pickup availability
Cryo Armor Cut 15/16" Dia. Drill Bit, Carbide 118o Point
$0.00
Couldn't load pickup availability
Cryo Armor Cut 5/8" Dia. Drill Bit, Carbide 118o Point
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit 5/16" (M8)
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit 5/16" (M8)
$0.00
Couldn't load pickup availability
Double Flute Step Drill Bit 1/8 to 1/2"
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit 5/16" (M8)
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit 5/16" (M8)
$0.00
Couldn't load pickup availability
Double Flute Step Drill Bit 1/8 to 1/2"
$0.00
Couldn't load pickup availability
Bumper Radiator and Grille Drive Rivet 7mm Hole
$0.00
Couldn't load pickup availability
Push-Type Retainer Nylon 16 x 19mm
$0.00
Couldn't load pickup availability
Bumper Fascia General Purpose Split Rivet 3/16"
$0.00
Couldn't load pickup availability
3" Pneumatic Cut-Off Tool
$0.00
Couldn't load pickup availability
Sheet Metal Drill Bit Alloy Steel 1/4"
$0.00
Couldn't load pickup availability
Interchangeable Hex Bit Set 20Pc Torx
$0.00
Couldn't load pickup availability
Product Description
• Modified relief angles on a 135° point penetrate the workpiece easier while maintaining a durable outside cutting edge• Titanium CarboNitride (TiCN) coating improves heat resistance and reduces wear to the cutting edges; outperforms Titanium Nitride (TiN) coatings
• Three-flute design removes chips effectively
• No cutting fluids are needed for Cobra™ Drill Bits
• Three flats are ground on the shanks (size 1/4" and greater) to reduce the chances of slippage and breaking
• For use on heat-treated, hardened material up to Rc 65
• Recommended for drill press operation only
NOTE: Cobra™ Drill Bits should be run at higher speeds than standard high-speed steel twist drills. It is also recommended that a woodpeckering technique be used to prevent chips from clogging in the flutes.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | P58056 |
|---|---|
| Drill Type | Fractional |
| Type | Drill Bit |
| Material | Carbide |
| Finish | Titanium CarboNitride |
| Diameter | 1/2 " |
| Decimal Equivalent | 0.5000 " |
| Point | 135 ° |
| Flutes | 3 |
| Flute Length | 2 " |
| Overall Length | 3-1/2 " |
| SAE Code | TD0CSX 0.5000 SB056 / 02.00 - 03.50 |
| UNSPSC #: | 23241605 |
| TAA Compliant: | Yes |
| Weight: | 0.33 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov
