Super 77 Hose Clamp SS 5/8 to 1-1/4"
(Pack of
25.0)
300 Series stainless steel hose clamp with 305 Series stainless steel screw
Thicker, heavier and stronger than standard clamps
Provides higher sealing pressure and band load with lower torque to the screw
100% mechanically interlocked construction
No spot welds corrosion-resistant
Combination 5/16" hex head screw with deep slot use wrench, nut driver or screwdriver to tighten
Size indicated on each hose clamp
Rounded edges prevent hose damage
Full 1/2" band width for more compression area
Four-piece housing for greater PSI
For marine and in-plant applications also acceptable for use in dairy and food processing
Standard 3/16" wall
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov
Catalog Page#: 7-4
Frequently Bought Together

Band-It Clamp High-Carbon Steel 2 x 5/8"
Couldn't load pickup availability

Miniature Clamp SS 7/32 to 5/8"
Couldn't load pickup availability

Lawson Mak-A-Clamp SS 100' Roll of Band
Couldn't load pickup availability

DOT Compression Elbow Male 90° Brass 5/8 x 3/4"
Couldn't load pickup availability

Parker DOT Compression - Nylon Male Connector 1/4x1/4
Couldn't load pickup availability

DOT Compression Connector Female Brass 3/8 x 1/8"
Couldn't load pickup availability

H353H Truck Hose 59/64" OD x 250'
Couldn't load pickup availability

Non-Perforated Clamp 316 SS #4 7/16 to 11/16"
Couldn't load pickup availability

H213 Truck Hose 39/64" OD x 50'
Couldn't load pickup availability

BluShield Rubber Pressure Washer Hose Assembly 1/4" x 25'
Couldn't load pickup availability

Rubber Air Hose Reel Dual Arm Assembly 3/4" x 50'
Couldn't load pickup availability

Avagard Rubber Water Hose Assembly 3/4" x 100'
Couldn't load pickup availability

Front License Plate to Bumper Cover Split Rivet
Couldn't load pickup availability

Bumper Drive Rivet Plastic 10mm Hole
Couldn't load pickup availability

Front/Rear Bumper Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Product Description
300 Series stainless steel hose clamp with 305 Series stainless steel screw Thicker, heavier and stronger than standard clamps
Provides higher sealing pressure and band load with lower torque to the screw
100% mechanically interlocked construction
No spot welds corrosion-resistant
Combination 5/16" hex head screw with deep slot use wrench, nut driver or screwdriver to tighten
Size indicated on each hose clamp
Rounded edges prevent hose damage
Full 1/2" band width for more compression area
Four-piece housing for greater PSI
For marine and in-plant applications also acceptable for use in dairy and food processing
Standard 3/16" wall
Technical Specifications
Item#: | 85497 |
---|---|
Category | Super 77 Hose Clamps |
SAE Size | 12 |
Material | 300 Series Stainless Steel bands with 305 Series Stainless Steel Screw |
Fits Hose I.D. | 5/8, 3/4 |
Size | 12 " |
Minimum Diameter | 1/2 " |
Maximum Diameter | 1-1/4 " |
Band Width | 1/2 " |
Thickness | 1/2 " |
UNSPSC #: | 31162906 |
TAA Compliant: | Yes |
Weight: | 0.05 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov





