Terminal Crimping Tool with Interchangeable Die, 26-16 AWG, Full Cycle Ratchet, Suitable for Insulated Terminals
(Pack of
1)
SKU:95108 Item#: 95108
• Professional tool incorporating a single frame with several interchangeable dies
• Full cycle ratchet with safety release
• High-quality electrical and mechanical crimps are made simultaneously
• Crimps meet or exceed industry standards
• Assures a positive mechanical and electrical crimp and ease of use
• Crimping dies can be easily switched with two screws
The die will slide out towards the front of the frame simply by loosening the two socket head screws and removing them.
To replace the die
1. Simply extend the frame to its full open position.
2. Close the frame approximately halfway.
3. Insert the die into the frame until it stops. All dies can be inserted only one way for the tool to close properly.
4. Tighten the screws approximately halfway.
5. Close the frame to press the dies against each other. This helps to align the dies in the frame.
6. Finish tightening the screws.
7. Frame and tool are complete and ready for use.
Frequently Bought Together
Crimping Tool Forged 22-10 AWG
$0.00
Couldn't load pickup availability
Visa Ratchet Crimping Tool 22-10 AWG
$0.00
Couldn't load pickup availability
Terminal Crimp Die 22-10 AWG
$0.00
Couldn't load pickup availability
Wire Stripper-Cutter 6" Stainless Steel Jaws
$0.00
Couldn't load pickup availability
Tubular Nozzle
$0.00
Couldn't load pickup availability
Triac ST Professional Heat Gun
$0.00
Couldn't load pickup availability
1/4" Cordless Impact Hex Driver Charging Bundle
$0.00
Couldn't load pickup availability
2Pc Index-Tend Pry Bar Set
$0.00
Couldn't load pickup availability
Compact Cordless Circular Saw Charging Bundle
$0.00
Couldn't load pickup availability
Engine Under Cover Drive Rivet Plastic 7mm Hole
$0.00
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Drive Rivet Nylon M8
$0.00
Couldn't load pickup availability
Sheet Metal Drill Bit Alloy Steel 1/4"
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 2-3/4" (M8)
$0.00
Couldn't load pickup availability
Cross-Over Socket Extension Set, 3/8" Drive, 3 Piece
$0.00
Couldn't load pickup availability
Product Description
• Professional tool incorporating a single frame with several interchangeable dies• Full cycle ratchet with safety release
• High-quality electrical and mechanical crimps are made simultaneously
• Crimps meet or exceed industry standards
• Assures a positive mechanical and electrical crimp and ease of use
• Crimping dies can be easily switched with two screws
The die will slide out towards the front of the frame simply by loosening the two socket head screws and removing them.
To replace the die
1. Simply extend the frame to its full open position.
2. Close the frame approximately halfway.
3. Insert the die into the frame until it stops. All dies can be inserted only one way for the tool to close properly.
4. Tighten the screws approximately halfway.
5. Close the frame to press the dies against each other. This helps to align the dies in the frame.
6. Finish tightening the screws.
7. Frame and tool are complete and ready for use.
Technical Specifications
| Item#: | 95108 |
|---|---|
| Type | Crimping Tools |
| Style | Term Crimp Terminal and Connector Crimping System |
| Crimp Range | 26-16 |
| Description | Tool with 95104 Die |
| UNSPSC #: | 27111500 |
| TAA Compliant: | Yes |
| Weight: | 1.3 lb |
