CryoBore 1-1/8" Dia. Annular Cutter, 1-3/16" Cutting Depth
(Pack of
1.0)
• Fast - Advanced multiple cutting edges have a special geometry and kerf angle that reduces loading and increases cutting speeds
• Lower Heat - The thinner moly/cobalt cutting edges produce less frictional heat
• Long Life - Cryophase™ treatment extends tool life in tough cutting like structural and truck frame steel without pre-drilling
• Weldon shank fits most mag drills
Specifications
• Cryophase™: Thermal cycling cryogenic treatment
• Material: Modified moly/cobalt tool steel
• Cutting Tooth Hardness: 64-65Rc
Note: Pins not included with individual cutters.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Frequently Bought Together
HSS Annular Cutter 1"
Couldn't load pickup availability
CryoBore 1/2" Dia Annular Cutter, 2-3/8" Cutting Depth
Couldn't load pickup availability
High-Performance M2-AL Annular Cutter 2-1/16"
Couldn't load pickup availability
Annular Cutter Ejector Pin For 1"- 1 Cutting Depth Cutters
Couldn't load pickup availability
HSS Annular Cutter 3/4"
Couldn't load pickup availability
1" Dia. Annular Cutter, 1" Cutting Depth, Pin Not Included
Couldn't load pickup availability
1" Surface Conditioning Disc, Fine
Couldn't load pickup availability
1 " Surface Conditioning Disc Holding Pad
Couldn't load pickup availability
1" Surface Conditioning Disc, Medium
Couldn't load pickup availability
Front Bumper Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Nylon Cable Tie 7-1/2" Black
Couldn't load pickup availability
Rechargeable Penlight Flashlight
Couldn't load pickup availability
Scotch-Brite Roloc Surface Conditioning Disc 2"
Couldn't load pickup availability
Cryobit 1/8" Dia. Maintenance Drill Bit , 135o Split Point, No Flats
Couldn't load pickup availability
Spot Weld Remover Drill Bit 5/16" (M8)
Couldn't load pickup availability
Product Description
• Fast - Advanced multiple cutting edges have a special geometry and kerf angle that reduces loading and increases cutting speeds• Lower Heat - The thinner moly/cobalt cutting edges produce less frictional heat
• Long Life - Cryophase™ treatment extends tool life in tough cutting like structural and truck frame steel without pre-drilling
• Weldon shank fits most mag drills
Specifications
• Cryophase™: Thermal cycling cryogenic treatment
• Material: Modified moly/cobalt tool steel
• Cutting Tooth Hardness: 64-65Rc
Note: Pins not included with individual cutters.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | DY81863800 |
|---|---|
| Cutting Diameter | 1-1/8 " |
| Depth of Cut | 1-3/16 " |
| Tooth Material | Moly/Cobalt |
| UNSPSC #: | 23241600 |
| TAA Compliant: | No |
| Weight: | 0.295 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
