3/4" Dr Retaining Ring Cush Gauge 1-5/8"
(Pack of
1)
Cracked sockets and or worn drive tools cause each other to turn excessively in relation to each other
Designed with a resin crush gauge to help identify when to replace worn sockets
Drive tool and socket should line up when in use and should not pinch the crush gauge
One piece construction, no loose parts
Pin is made of resin which allows the material to compress without breaking
Retaining rings are used to help secure sockets onto drive tools
The resin crush gauge on the pin helps indicate when a socket is excessively worn and should be replaced
The rotational forces are between the drive tool and the socket
They are not intended to bear any load
This action pinches the small fin or the crush gauge on these retaining rings. If the crush gauge is pinched, it is an indication that the socket and or the drive tool need to be replaced
Frequently Bought Together

6-1/2" 1000 Volt Insulation Cable Cutter
Couldn't load pickup availability

Snap Back Metal Work Hammerless Tool Set, 4pc
Couldn't load pickup availability

Wrench Crowfoot Open End 3/8 DR 19mm
Couldn't load pickup availability

Impact Retaining Ring, 3/4" Drive, 1-3/4"
Couldn't load pickup availability

Impact Retaining Ring, 3/4" Drive, 3/16" to 1-3/4"
Couldn't load pickup availability

Impact Retaining Ring, 3/4" Drive, 3/16" to 1-3/4"
Couldn't load pickup availability

Wheel House Molding Split Rivet Aluminum 3/16"
Couldn't load pickup availability

Front Bumper Push-Type Retainer Nylon 20mm
Couldn't load pickup availability

Front/Rear Bumper Push-Type Retainer Nylon 20mm
Couldn't load pickup availability

1/2" Drive Standard Impact Socket, 7/16"
Couldn't load pickup availability

1/2" Drive Deep Impact Socket, 36mm
Couldn't load pickup availability

1" Drive Deep Impact Socket, 1 5/16"
Couldn't load pickup availability

Razor Blade, Single Edge, High Carbon Steel
Couldn't load pickup availability

Large Index-Tend Pry Bar
Couldn't load pickup availability

Cordless Right Angle Grinder Charging Bundle
Couldn't load pickup availability
Product Description
Cracked sockets and or worn drive tools cause each other to turn excessively in relation to each other Designed with a resin crush gauge to help identify when to replace worn sockets
Drive tool and socket should line up when in use and should not pinch the crush gauge
One piece construction, no loose parts
Pin is made of resin which allows the material to compress without breaking
Retaining rings are used to help secure sockets onto drive tools
The resin crush gauge on the pin helps indicate when a socket is excessively worn and should be replaced
The rotational forces are between the drive tool and the socket
They are not intended to bear any load
This action pinches the small fin or the crush gauge on these retaining rings. If the crush gauge is pinched, it is an indication that the socket and or the drive tool need to be replaced
Technical Specifications
Item#: | 1225104 |
---|---|
Type | Retaining Ring |
Drive Size | 3/4 " |
Length | 1.812 " |
UPC | 662679978020 |
Socket Groove Diameter | 1 5/8 " |
UNSPSC #: | 27000000 |
TAA Compliant: | Yes |
Product Restrictions
